Description
[contact-form-7 404 "Not Found"]
Cyclone IV FPGA Controller
FEATURES:
• Based on Altera family Cyclone IV, Device : EP4CE30
• One 34 pin header used for IPM Interface.
– 16 PWM output
– 8 capture inputs.
• One 26 pin header ADC.
– 4 channel 1MSPS ADC.
– Total 8 channel using 2 Nos of ADC.
– 12 bit resolution.
– Input range -10V to 10V / -5V to 5V.
• One 5 pin phoenix connector DAC
– 4 channel DAC, 12 bit resolution.
– Output range -10V to 10V / -5V to 5V.
• 8 output Light Emitting Diodes (LEDs).
• 8 input slide Switches.
• 4 user push button switches.
• 2-user limit switch.
• 20 x 4 Alphanumeric LCD display.
• On Board Isolated JTAG Programmer Compatible with QuartusII software.
• Isolated USB (USB to Serial) interface.
• 3 Nos of 20 pin header each have 16 IOs.
Related products
IPM Based Power Module
Power Module is designed for Motor control Applications upto 3 HP by using IGBT & DIODE Technology Based IPM. Input:1 Phase / 3 phase 50 Hz AC. Output : 400V/10A (MAX), AC/DC on each Leg of 3 phase Bridge
FEATURES:
• 1200V, 25A, 3 Phase IGBT Inverter Bridge • 1200V, 10A IGBT for Over Voltage breaking • Built - in Over Voltage, Under Voltage, Over Current & Over Temperature ProtectionADDITIONAL FEATURES:
• 1200V, 25A Converter Bridge for AC-DC power conversion • 4 Nos of Hall Effect current sensors are provided to sense the DC Link current & 3 output current of the Inverter Bridge • 1 No of Hall Effect Voltage sensor is provided to sense DC Link voltage • All the PWM signals are isolated using Opto Isolator • Protection circuit for over current with LED indication • Optically Isolated Fault signal from the IPM is given to the Embedded/DSP controllers for protection. • Independent Power supplies for all Isolated circuits. • 0-900V Voltmeter is provided to Indicate the DC Link Voltage • All current, PWMS & Feedbacks are terminated at Front panel • FRC Connectors are provided to Interface with the Embedded/DSP controllers • All the Input/output Lines are terminated at Banana sockets.
10KW IGBT Based Power Module
FEATURES:
• 1200V/ 75A, Peak Semikron based IGBT module • 8 Nos of IGBT’s provided with independent eight driver (inbuilt opto isolator) • All the collector and emitter terminals are brought out of proper connectors for power circuit connection • All the gate and emitter terminals are brought out and terminated on front panel to view driver output fault output • Indicator LED provided for PWM input and power supply input • Proper heat sink provided for all the IGBTs with cooling fan provision • All are enclosed by viewable acrylic cabinet • Temperature sensor provided for over temperature Protection • PWM inputs are brought out on Front Panel, you may connect any controller for interface • One common +15V Power supply for all the driver circuit, Inbuilt isolated power supply provided. • Over current protection and short circuit protection provided for all individual IGBT module • Reset circuit provided and terminated to clear the fault • Snubber capacitor provided for dv/dt protection for all IGBT module • 60A 3 phase bridge rectifier and filter circuit available for power circuit input.
3Ø – 3Ø Matrix Converter
FEATURES:
• 9 No. Bi-directional Switch with IGBT and Fast Diode Bridge,Rating@1200V 50A Forms 3 Phase to 3 phase Matrix Converter Power Circuit • Output of Matrix Converter Terminated by Banana Connector in the Front Panel • 9 No. High Speed Opto- IC Provided for Gate PWM Isolation. • 9 No. Single Channel IGBT Driver IC with Current Limiting Facility Provided for IGBT Gate Driving. • 9 No. 15V DC Power Supply Provided Internally for Control Circuit. • 3 No. Inductor and AC Capacitor Provided for Three Phase Input Filter. • One No Three Phase Synchronizing Transformer (230/9V) Provided for three Phase Supply Synchronization • 6 nos Hall-effect Current Sensor with Signal Conditioning Circuit Provided for Output and Input Current Measurement and Protection. • AC voltmeter is provided for measure the input AC voltage. • +/- 15V DC Internally Provided for Sensor Signal Conditioner Circuits. • MCB Provided for Input power ON/OFF and OL Protection ON/OFF Switch. • Test points are provided on the front panel to measure the voltage, current and PWM signals • 34 pin FRC Connector Provided for IGBT Gate PWM Inputs. • Input : Three Phase 440V AC, 50 Hz. • Output : Three Phase Variable Voltage, variable frequency • Rating : Suitable for 1 HP 3Ø AC Induction Motor
Reviews
There are no reviews yet.