Description
[contact-form-7 404 "Not Found"]
Refrigeration Test Rig
Features
• 5 Nos of thermocouples are provided to measure the temperature at different points.
• One multi channel temperature indicator is provided to display the temperature
• One capillary tube and one thermo expansion valve is provided to check the performance separately.
• Compressor supplies refrigerant through evaporator to find out cooling effect
• 4 Nos. of Pressure Gauges are provided to measure the pressure at various point
• One Energy meter is proivded to measure the overall power consumption
• One voltmeter is provided to display the voltage.
• One ammeter is provided to display the current.
Specification
• Compressor :Hermatic
• Capacity : 1/4 Ton
• Supply : 230 V AC / 50 Hz
• Condensor : 12 Coil
• Evaporator : 15 Liter Capacity
• Refrigerant : R134A
Related products
Four Stroke Single Cylinder Diesel Engine Trainer Rig
Features
• One Thermocouple provided to measure the temperature at exhaust. • One temperature indicator provided to display the temperature. • A CC tube provided to measure the fuel consumption by the engine. • Stop watch provided to measure fuel consumption in time basis • A Tachometer provided to measure the speed of the engine. • An air drum provided to measure the intake air flow. • An U-Tube manometer provided to measure the pressure head of intake air flow. • Fuel panel provided to fix the CC tube and fuel tankSpecification
• Make :Kirloskar • Power : 6 HP • Speed : 1500 rpm • Cooling type : Air cooled • Start : Hand Start • Loading type : Eddy current brake (or) • : Electrical Load (or)
Hydraulic Linear Actuation System Trainer with Labview Interfacing
Features
• This trainer helps to learn the characteristics of double acting cylinder namely direction, speed & force. • A Microcontroller ADC relay driver provided to actuate the cylinder. • Gear pump supplies the hydraulic fluid to double acting cylinder through direction control valve. • Pressure control valve controls the flow rate of fluid to cylinder. • Single phase induction motor drives the pump. • Control unit communicate with PC and controls the double acting cylinder using LabVIEWSoftwares. • Two proximity sensors are provided to indicate the position of the cylinder. • Load cell measures the force developed by the cylinder. • 5/2 Double Solenoid Valve directs the cylinder. • One tank is used to store the hydraulic fluid.
Reviews
There are no reviews yet.