Water Bath Incubator Shaker

Product Details

Material	:	STAINLESS STEEL
Model	:	Horizontal
Switches	:	Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
Pre-filter	:	99.00% down to 5 micron.
HEPA Filter	:	99.97%-99.99% down to 0.3 micron, Mesh guard for protection.
Airflow	:	Frontward Horizontally
Noise Level	:	60 decibel ± 5%.
Velocity	:	0.35-0.50m/sec.
Work Table	:	Made up of stainless steel 304gr. Cock for gas on work table.
Side Panels	:	6mm±.5mm thick acrylic sheet.
Front door	:	Made of acrylic.
UV Lamp	:	15/30W, make Philips Holland,
Illumination	:	LED White Light.
Pressure	:	Digital Manometer 0-50mm range with filter failure alarm.
Power Supply	:	230V ± 10V/50 Hz single phase A.C.
Cabinet	:	304 grade. Stainless Steel.
Heavy Duty Blower	:	Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor.

Working Area Size

60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.

Specification

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.

Inner Chamber Size	Cap.	Material
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	Aluminium
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	S.S.
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	Aluminium
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	S.S.
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	Aluminium
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	S.S.

Optional

Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.

A digital photofluorometer, you can perform precise analysis of flurophors and quinine. Designed specifically for life science laboratories, this smart instrument fulfills your requirements of accurate results with the sensitivity you demand. This fluorometer is a compact system, which occupies very low bench space, while offering convenient and excellent throughput for fluorescence assays. It is a fluorometer model has been designed and manufactured for laboratories, where routine analysis of fluorophors is a prime requisite. This system uses 50 W tungsten halogen lamp, This digital fluorometer greatly enhances productivity of your laboratory, designed with latest technology, use of imported mechanical and electrical parts, imported lamp and other components; it allows you to perform fluorometric determination of quinine more quickly.

Covers entire visible range:	Excellent detection sensitivity
Compact and efficient:	Bright red seven segment LED display
Occupies low bench space:	Precise analysis of Flurophors & Quinine

Specifications

Fluoro Sensitivity:	Full-scale deflection obtained with 1 ppm quinine sulfate in 0.1 N sulphuric acid (primary wavelength 360 nm)
Display:	3 digits bright red seven segments LED display
Excitation Source:	12V, 50W Tungsten Halogen Lamp
Sensitivity Range:	Adjustable in 4 ranges
Detector:	Highly sensitive wide range photodiode/cell
Sample Test Tube Size:	15 mm (D) x 80 mm (H)
Minimum Sample:	4 ml
Power:	230 V ± 10%, 50 Hz. AC
Dimension:	260 x 335 x 160 mm (Approx.)

Specification

Outer made of M.S. Sheet powder coated & inner chamber is made of thick S.S. Sheet. The gap between two walls is fitted with high grade glass wool. The glass window makes it possible to inspect specimen without disturbing inner Temperature. The unit has a temprature range from ambient to 60°. Temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator Cum Controller with a accuracy of + 0.5°C. Air Circulation Fan is provided to maintain stability throughout. Speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S. Sheet with Lotus type clamps to hold flasks. Unit is fitted with Digital RPM Meter, 999 min digital time.

Optional Accessories

Timer 0-24 Hours. 16 Flasks of 100ml. instead of 9 flasks of 250ml. 9 Flasks of 500ml or 25 flasks of 100ml instead of 16 flasks of 250ml. 25 Flasks of 250ml or 36 flasks of 100ml instead of 16 flasks of 500ml.

Size

9 Flasks of 250ml. 16 Flasks of 250ml. 16 Flasks of 500ml.