Conical Percolator

Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and the huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives the higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for a long time. A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source. Thus avoiding the need of continues running of the vacuum pump.

Body:	Stainless steel. 304
Desiccator:	SPolycarbonate, 8” Desicator Provided with Digital Timer
Timer:	S3999 sec. Digital
Vacuum Level:	S 22" Hg
Current:	S 5A
Voltage:	S 230

(S.S 304) 120mm Dia. Permeability cups for determining the water-vapor transmission of paints, varnishes, coatings, coating systems and related products. The Permeability cup consists of a cup, seal ring and cover ring. The seal ring is designed to prevent turning when closing the cover. The Permeability cup is suitable for testing both self-supporting coating and non-self-supporting coatings. Water-vapor transmission is of interest for high humidity conditions. The wet cup method is thus the reference method for determining water-vapor transmission, if agreed up on otherwise, other procedures or conditions the dry cup method may be used.

Specification

Orbital shaking incubator cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S sheet duly powder coated & inner chamber is made of thick S.S. sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5°C to 60°C. The temperature is controlled by Dual Display Microprocessor PID Temperature Indicator cum Controller with a accurancy of + 0.5°C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S sheet with lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital timer.

Optional Accessories

Timer 0-24 Hours. Automatic voltage stabilizer 3KVA (Most rec.).

Size

16 Flasks of 500ml. 25 Flasks of 250ml. 36 Flasks of 100ml.

Specification

Standard Double Wall Fabrication, inner & outer chamber made of thick mild steel sheet. Painted with hammer tone paint finish. The gap between the walls is fitted with special grade glass wool. Provided with two or three removable shelves. Heating elements provided on three sides to attain quick and uniform heating in range of 30°C to 110°C + 1°C controlled by hydraulic type capillary thermostat. An L- Shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.

Optional

Air circulating fan. Timer 0-24 hours.

Chamber Size In mms	Chamber Size	Cap. (App.)
300x300x300	(12"x12"x12")	28L
350x350x350	(14"x14"x14")	45L
400x400x400	(16"x16"x16")	65L
450x450x450	(18"x18"x18")	95L
600x450x450	(24"x18"x18")	125L
600x600x600	(24"x24"x24")	224L