Description
[contact-form-7 404 "Not Found"]
8085 Microprocessor Trainer Kit
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed.
• RAM : 8KB expandable upto 32KB, Jumper selectable.
• EPROM : 8KB expandable upto 32KB, Jumper selectable.
• Lithium Battery backup for RAM.
• 21 Keys multi-function keyboard with double shot characters for long life.
• 6 digit 7Segment RED LED Display.
• 3 Channel 16 bit counter / timer terminated in a 10 Pin Connector.
• 48 TTL I/O Lines, terminated at 26 pin FRC connector
• RS232C Compatible serial Port terminated in a 9 Pin “D” Male Connector.
• One VXT Bus (50 Pin FRC Connector) for interfacing VBMB series of Experiment boards and bus expansion.
• Built-in SMPS Power Supply: Input : 230V AC, Output: +5V / 3.5A, +12V / 150mA.
• Built in Line Assembler and Disassembler provided.
• Software single stepping of user programs by instruction for software debugging.
• This trainer helps to learn the characteristics of double acting cylinder namely direction, speed & force.
• A Microcontroller ADC relay driver provided to actuate the cylinder.
• Gear pump supplies the hydraulic fluid to double acting cylinder through direction control valve.
• Pressure control valve controls the flow rate of fluid to cylinder.
• Single phase induction motor drives the pump.
• Control unit communicate with PC and controls the double acting cylinder using LabVIEWSoftwares.
• Two proximity sensors are provided to indicate the position of the cylinder.
• Load cell measures the force developed by the cylinder.
• 5/2 Double Solenoid Valve directs the cylinder.
• One tank is used to store the hydraulic fluid.
Related products
8085 Microprocessor LC LCD Trainer
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed. • RAM : 8KB expandable upto 32KB, Jumper selectable. • EPROM : 8KB expandable upto 32KB, Jumper selectable. • Lithium Battery Back up for RAM • PC Keyboard (104Keys) • 16x2 Alphanumeric Dot Matrix Liquid crystal display with back light • 3 Channel 16 Bit counter / timer terminated in a 10 pin connector using 8253 • 24/22 TTL I/O lines, terminated at 1 No of 26-Pin FRC connector by using 1 No of 8255/1No 8155 respectively • 8 Nos of Digital inputs terminated and given through on board 8 way Dip switch • 8 Nos of Digital outputs are terminated and displayed in the 8 Nos of SMD type LEDs • Digital I/O lines are terminated in 20-Pin connector • RS 232C compatible Serial port terminated in a 9-pin 'D' male connector • One VXT-Bus (50-Pin FRC Connector) for interfacing VBMB series of experiment boards for bus expansion. • Interrupts are terminated in a 5-Pin connector • Built in Line Assembler and Disassembler provided. • Software single stepping of user programs by instruction for software debugging.
89C51 Microcontroller Trainer
Specification
• Core :NXP89C51RD2 / 8051 • Internal Memory :64KB Flash, 1KB RAM • External Memory :64KB EPROM, 64KB RAM • 16 Digital Outputs - SMD LED Interface. • 16 Digital Inputs - Switch Interface. • 20X4 Character LCD Interface. • I2C Peripherals : - 8 Bit ADC [8-Bit 4 Channel ADC, Two Potentiometer Provide in on board]. - 8 Bit DAC. • Six 7-Segments Display Interface. • On Board Stepper Motor Driver is provided. • PWM lines are terminated at Terminal Block. • IBM PC Keyboard Interface for entering program. • CPU Lines are terminated at 50 pin Expansion Header.(VBMB and VPIC) • I/O ports terminated to connect to external devices. • Program / Execution switch is provided for serial ISP (Using ISP Utility Software). • ADC, DAC lines are terminated at terminal blocks.
8086 Microprocessor Trainer Kit
Specification
• INTEL 8086CPU AT 4.77 MHZ CLOCK SPEED • 16KB for monitor EPROM upgradable to 64kb • 16KB RAM expandable to 64KB • Battery backup provision for RAM upto 64KB • 16 x 2 (or) 20 x 4 Alphanumeric LCD display • 101 keys IBM compatible keyboard • 24 TTL I/O lines brought out to two nos., of 26 pin FRC connector • 1 number of standard RS232C compatible serial port brought out to a pin D type male connector. • 3 channel 16 bit counter/timer using 8253. • Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB series • of experiment boards and bus expansion. • 8 no’s of interrupt lines are terminated at a 10 pin connector. • Kit operates with a single +5V/DC supply • The kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover. • Built-in line assembler & Disassembler • Powerful debugging monitor to develop user program.
Reviews
There are no reviews yet.