Ball Mill 2kg

Specifications

Made of stainless steel with the inner chamber of a thick pressure gauge. The outer surface has a mirror polish. The lid of this autoclave is thick along with a safety valve, pressure release valve, and drain valve. Spring loaded valve to adjust the pressure. Works on 220V AC. Radial or wing nut type door locking. Digital temperature indicator. Water level indicator.

Dimension	Power	Capacity
250x450mm	2KW	22litres
300x500mm	3KW	40litres
350x550mm	4KW	50litres
400x600mm	5KW	75litres
450x600mm	5KW	95litres
550x750mm	6KW	187litres

Blood collection and storage is done is special tubes which allow the preservation of the blood sample over long periods. These tubes can be made of glass or plastic and the caps of these vials are coloured to indicate the additives in them. Some of the additives are anticoagulants such as EDTA, sodium citrate or heparin. Other substances include preservatives. The containers containing coagulants are capped with gold, red or orange caps. The ones containing anti-coagulants are green, which contain heparin, purple or lavender indicates ones which contain EDTA, grey capped tubes contain sodium fluoride or oxalate. Blood collection tubes (also called as vacutainers) are extensively used in hospitals, medical centres and diagnostic centres. In biological labs, it is used in experiments like haemolysis etc. Non Vacuum Vials (Pk of 100) Vacuum Vials (Pk of 100)

Specification

Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.

Features

Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.

Pressure Gauge

Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units. (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour. Equipped with steam release /control valve and flexible metal exhaust tube.

Capacity (Lt.)	Power	Size	Type
21 Ltr	Electric	300 x 300mm = 12” x 12”	Mirror Finish
21 Ltr	Non Electric	300 x 300mm = 12” x 12”	Mirror Finish
27 Ltr	Electric	300 x 380mm = 12” x 15”	Mirror Finish
27 Ltr	Non Electric	300 x 380mm = 12” x 15”	Mirror Finish
37 Ltr	Electric	350 x 380mm = 14"x15"	Mirror Finish
37 Ltr	Non Electric	350 x 380mm = 14"x15"	Mirror Finish

It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock. A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump. (Supplied without wolf bottle and vacuum/pressure pump). These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media. Filtration area is 12.5 cm and has a holding capacity of 250ml. Though the only vacuum is required for filtration, some pressure is required for flushing liquids.

SPECIFICATIONS

Material:	Stainless Steel
Branch Test:	3 Dia. 47mm
Filtration Area:	12.5 cm
Holding Capacity:	250 ml

FEATURES

Robust design. Easy to use. Rustproof.

APPLICATION

For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test