Description
[contact-form-7 404 "Not Found"]
CNC Lathe Trainer1
CONTROLLER:
Type of control system: PLC based system
Main Spindle Drive : AC Motor with VFD
Z and X Drives : Stepper drive with RAMP function
Input to Stepper Motor : Optically Isolated
Motor Drive :TTL Compatible
Run Speed Control : Computer controlled through software
Interpolation : Linear / Circular / Parabolic
Cycles Used :G,M,S,T,F,I,K,M,F
Cycles : Circular Interpolation / Canned
Threading : Straight / Taper
Power Devices : Short Circuits and over Temperature Protected
Real Time Tool Path Simulation : Provided
MACHINE DETAILS:
Center height : 100mm
Swing over Carriage : 80mm
Distance between Centre : 250mm
Longitudinal Travel : 250mm
Weight : 350 kg
Dimension in mm : 1100 x 750 x 1700
Rapid Travel : 500mm/min
Resolution X & Z Axis : 10micron
Dt. Motor Power : 40V – 4A
Lubrication : Manual
SPINDLE:
Spindle Speed : Continuous Variable
Spindle Power : 1.5 HP
Inside Taper : MT3
Speed Range : 100 to 3000 RPM
Related products
CNC Lathe Trainer
Controller:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with Ramp function Input to Stepper : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled with software Interpolation : liner / Circular /Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation /canned Threading : Straight/Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 300mm Longitudinal Travel : 310mm Weight : 800kg Dimension in mm : 1300 x 800 x 1400 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron Automatic : providedAXIS TRAVEL:
X Axis : 80mm Z Axis : 310mmSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 2 HP Inside Taper : MT3 Speed Range : 50 to 3000Rpm
CNC Lathe Trainer Slant Bed
CONTROLLER:
Type of control system : PLC based system Axis motor and drive : Servo motor & drive with feedback Input ti servo : Optically lsolated Motor Drive : TTL compatible Interpolation : Linear/Circular /parabolic Cycles Used : G, M, S, T, F, I, K, M, F, Cycles : Circular interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuit and over Temperature Protected, Single Phase Protection Real Time Toolpath Simulation : providedMACHINE DETAILS:
Center Height : 100mm Swing over Carriage : 80mm Distance between Centre : 825mm Weight : 700kg Dimension in mm : 1250 x 900 x 1500 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron (Dia.) Automatic Lubrication : provided Tool Changer : Automatic – 8 stationSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 2HP Inside Taper : MT3 Speed Range : 100 to 3000 RPMAXIS TRAVEL:
X Axos : 100mm Z Axis : 300mm
CNC Mill Trainer1
CONTROLLER:
Type of Controller System : PLC based system under collaboration from tudor,uk Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive TTL Compatible Input to Stepper :Optically lsolated , motor drive TTL Compatible Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std Codes Real time tool path :with online 3D simulationTABLE:
Length x Width : 600 x 225 (approx.) Clamping Area : 450 x 160 (approx.) T Slots : 10mm slot width.MACHINE DETAILS:
Resolution : 5 micron(Standard) Distance from sindle :25-225mm(Nose to table top) Centerline to column :170mm Rapid Travel 700 mm/min Weight in kg : 950kg Dimension in mm : 1200 x 1200 x 1900 mmSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPM
CNC Lathe Trainer With Servo Drives
CONTROLLER:
(1) Type of control system: PLC based system (2) Main Spindle Drive : AC Motor with VFD (3) Z and X Drives : Stepper drive with RAMP function (4) Input to Stepper Motor : Optically Isolated (5) Motor Drive :TTL Compatible (6) Run Speed Control : Computer controlled through software (7) Interpolation : Liner / Circular / Parabolic (8) Cycles Used :G,M,S,T,F,I,K,M,F (9) Cycles : Circular Interpolation / Canned (10) Threading : Straight / Taper (11) Power Devices : Short Circuits and over Temperature Protected (12) Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
(1) Center height : 100mm (2) Swing over Carriage : 80mm (3) Distance between Centre : 250mm (4) Longitudinal Travel : 250mm (5) Weight : 350 kg (6) Dimension in mm : 1100 x 750 x 1700 (7) Rapid Travel : 500mm/min (8) Resolution X & Z Axis : 10micron (9) Dt. Motor Power : 40V – 4A (10) Lubrication : ManualSPINDLE:
(1) Spindle Speed : Continuous Variable (2) Spindle Power : 2 HP (3) Inside Taper : MT3 (4) Speed Range : 50 to 3000RPM
CNC Mill Trainer
CONTROLLER:
SIEMENS 802D Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety, 1.5 HP X, Y and Z Drives : SIEMENS Servo Motors and Drives Input to Stepper : Optically lsolated Motor Drive TTL compatible Interpolation : Linear, Circular parabolic Interpolation, Slot / Pocket Milling Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std CodesTABLE:
Length x Width : 450 x 175 (approx.) Clamping Area : 350 x 175 (approx.) T Slots : 10mm slot widthMACHINE DETAILS:
Resolution : 5 micron Tool Change : Automatic, 8 station Rapid Travel : 5000mm/min Weight in kg : 750kg Dimension in mm : 850 x 850 x 1550 mm Automatic Lubrication : Provided Repeatability : 10 micronSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 100 to 4000 RPMAXIS TRAVEL
Longitudinal Traverse : 250mm Cross Traverse : 175mm Vertical Traverse : 250mm
CNC Mill Trainer2
CONTROLLER:
Type of Controller System : PLC based system Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive Input to Stepper : Optically lsolated motor drive : TTL Compatible Runing Speed Control : Computer control with software Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided Real time tool path : Provided simulationTABLE:
Length x Width : 450 x 175 (approx.) Clamping Area : 360 x 130 (approx.) T Slots : 10mm slot width.MACHINE DETAILS:
Resolution : 5 micron Distance from sindle : 700 mm/min Tool Change : Quick Change , Manual Centerline to column : 140mm Weight in kg : 550kg. Dimension in mm : 850 x 800 x 1630SPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPM
Reviews
There are no reviews yet.