Dissolution Rate Test Apparatus

It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock. A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump. (Supplied without wolf bottle and vacuum/pressure pump). These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media. Filtration area is 12.5 cm and has a holding capacity of 250ml. Though the only vacuum is required for filtration, some pressure is required for flushing liquids.

SPECIFICATIONS

Material:	Stainless Steel
Branch Test:	3 Dia. 47mm
Filtration Area:	12.5 cm
Holding Capacity:	250 ml

FEATURES

Robust design. Easy to use. Rustproof.

APPLICATION

For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test

Specification

Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.

Features

Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.

Pressure Gauge

Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units. (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour. Equipped with steam release /control valve and flexible metal exhaust tube.

Capacity (Lt.)	Power	Size	Type
21 Ltr	Electric	300 x 300mm = 12” x 12”	Mirror Finish
21 Ltr	Non Electric	300 x 300mm = 12” x 12”	Mirror Finish
27 Ltr	Electric	300 x 380mm = 12” x 15”	Mirror Finish
27 Ltr	Non Electric	300 x 380mm = 12” x 15”	Mirror Finish
37 Ltr	Electric	350 x 380mm = 14"x15"	Mirror Finish
37 Ltr	Non Electric	350 x 380mm = 14"x15"	Mirror Finish

Sieve shakers are used to measure particle size as part of your research or quality control applications. Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.

Specification	:	Hot air oven, 2 shelves
Technical Specifications	:
Inside Body	:	Stainless Steel
Out Side Body	:	MS Powder coated with stove enamel paint. (SS body also available)
Number of Selves	:	2 Adjustable Perforated Selves.
Body Structure	:	Double Walled structure filled with glass wool insulation
Number of Heaters	:	2 x 1000 Watts
Heater Quality	:	High Quality Chrome Heater insulated with ceramic beads
Air Circulation	:	By Air Circulating Fan to ensure even temperature distribution.
Ventilation	:	Ventilation port with adjustable Opening.
Temperature Control	:	By Digital Temperature indicator and Controller
Temperature Display	:	Digital Temp. display
Range of Temperature	:	Ambient to 250ºC
Accuracy	:	0.10C
Least Count	:	1.0C
Power	:	220 Volt AC 50 Hz. Single Phase
Sizes available are	:	12" x 12" x 12" (28 Ltr.) 14" x 14" x 14" (45 Ltr.) 18" x 18" x 18" (95 Ltr.) 24" x 24" x 24" (224 Ltr.)