Fume Hood

Description

Mechanical Type (Routin) Phase : Single Phase Power : 50Hz Melting Temperature : upto 230˚C Voltage : 220V Features: The mounting block is illuminated from below by a lamp fixed in its housing. The aluminum block accepts three capillary tubes and mercury thermometer. The temp is regulated by energy regulator fitted to the unit. Supplied without capillary tubes and thermometer

Description

The basic set-up of the colorimeter is: LED light source: Produces polychromatic light over the entire visible region, 45 Broad spectrum filter: The colorwheel has nine different filters. The filter employed is selected by wavelength. Each filter will produce monochromatic light at a specified peak wavelength with a bandpass of 20 mm. The filters enable the user to perform tests from 400 to 680 nm. Cuvette Holder: It holds the inserted cuvette during testing. It is imperative the cuvette be consistently oriented in the holder. Round cells usually have orientation markings to correctly position the cuvette. Detector: A silicon photo diode is used as the detector. The photo detector current will change as a function of light energy. Display:The current signal from the detector is converted to a numerical value, absorbance and is shown on led display

Description

Pen Type AQUASOL (Rakiro) Fast, reliable and accurate measurement. Compact single chamber designBuilt-intemperature SensorAuto shut Off function to enhance battery lifeHold function for ease of read & recordEasy CalibrationAvailable in a Portable Pouch.

Description

Transparent Anaerobic Culture Jar of 3.5.lit. capacity which is made of Polycarbonate. The lid of the jar is made of Aluminum pressure die Casting fitted with Pressure Valve, Vacuum Valve, Safety Valve & compound Pressure cum vacuum gauge, three finger aluminum clamp and sealing "O" ring. This is recommended only where inside air of jar is removed thru vacuum pump and CO2 is filled in the jar thru CO2 gas cylinder to generate anaerobic condition in the jar. Also supplied with plain aluminum pressure die casted lid which can be fitted when readymade gas packs are used to generate the anaerobic conditions inside the jar. When readymade gas packs are used, there is no need of lid fitted with dial gauge etc., for extra life of equipment.