The basic set-up of the colorimeter is:
LED light source: Produces polychromatic light over the entire visible region, 45
Broad spectrum filter: The colorwheel has nine different filters.
The filter employed is selected by wavelength. Each filter will produce monochromatic light at a specified peak wavelength with a bandpass of 20 mm.
The filters enable the user to perform tests from 400 to 680 nm.
Cuvette Holder: It holds the inserted cuvette during testing.
It is imperative the cuvette be consistently oriented in the holder.
Round cells usually have orientation markings to correctly position the cuvette.
Detector: A silicon photo diode is used as the detector.
The photo detector current will change as a function of light energy.
Display:The current signal from the detector is converted to a numerical value, absorbance and is shown on led display
Pen Type AQUASOL (Rakiro)
Fast, reliable and accurate measurement.
Compact single chamber designBuilt-intemperature SensorAuto shut Off function to enhance battery lifeHold function for ease of read & recordEasy CalibrationAvailable in a Portable Pouch.
Transparent Anaerobic Culture Jar of 3.5.lit.
capacity which is made of Polycarbonate.
The lid of the jar is made of Aluminum pressure die Casting fitted with Pressure Valve, Vacuum Valve, Safety Valve & compound Pressure cum vacuum gauge, three finger aluminum clamp and sealing "O" ring.
This is recommended only where inside air of jar is removed thru vacuum pump and CO2 is filled in the jar thru CO2 gas cylinder to generate anaerobic condition in the jar.
Also supplied with plain aluminum pressure die casted lid which can be fitted when readymade gas packs are used to generate the anaerobic conditions inside the jar.
When readymade gas packs are used, there is no need of lid fitted with dial gauge etc., for extra life of equipment.
Extremely durable
Sturdy body
Excellent performance
High quality
Flow Rate 50Hz 1.8 CFM 51 L/min 60Hz 2.0 CFM 57 L/min Ultimate Vacuum Partial Pressure 2 Pa Total Pressure 150 micron Power ¼ HP Intel Port 1/4” Flare Oil Capacity 250 ml Dimensions 290x124x224 mm Weight 6.6 Kg
Gel Electrophoresis System Vertical Mini with glass plates, combs.Leak proof.
Moulded in single piece made of polycarbonate.
99.9% pure platinum wire is used in electrode.
Humidifier based on the rotating disc-splash plate principal.
It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room.
Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time.
The unit is capable of atomizing up to 3 liters of water in an hour at full evaporation in the driest possible ambient conditions.
The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters.
The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation.
To work on 220/230 volts A.C. supply
Electrophoresis power supply, Analog Fixed Current 250 mA and also 5 type of fixed voltage means 50V,100V, 150V, 200V and 250V.
It is recommended for mini Horizental and mini vertical Electrophoresis Apparatus.
Mechanical Type (Routin)
Phase : Single Phase
Power : 50Hz
Melting Temperature : upto 230˚C
Voltage : 220V
Features:
The mounting block is illuminated from below by a lamp fixed in its housing.
The aluminum block accepts three capillary tubes and mercury thermometer.
The temp is regulated by energy regulator fitted to the unit.
Supplied without capillary tubes and thermometer
Reviews
There are no reviews yet.