Lipstick Mould

Specification	:	Hot air oven, 2 shelves
Technical Specifications	:
Inside Body	:	Stainless Steel
Out Side Body	:	MS Powder coated with stove enamel paint. (SS body also available)
Number of Selves	:	2 Adjustable Perforated Selves.
Body Structure	:	Double Walled structure filled with glass wool insulation
Number of Heaters	:	2 x 1000 Watts
Heater Quality	:	High Quality Chrome Heater insulated with ceramic beads
Air Circulation	:	By Air Circulating Fan to ensure even temperature distribution.
Ventilation	:	Ventilation port with adjustable Opening.
Temperature Control	:	By Digital Temperature indicator and Controller
Temperature Display	:	Digital Temp. display
Range of Temperature	:	Ambient to 250ºC
Accuracy	:	0.10C
Least Count	:	1.0C
Power	:	220 Volt AC 50 Hz. Single Phase
Sizes available are	:	12" x 12" x 12" (28 Ltr.) 14" x 14" x 14" (45 Ltr.) 18" x 18" x 18" (95 Ltr.) 24" x 24" x 24" (224 Ltr.)

Specification

Orbital shaking incubator cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S sheet duly powder coated & inner chamber is made of thick S.S. sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5°C to 60°C. The temperature is controlled by Dual Display Microprocessor PID Temperature Indicator cum Controller with a accurancy of + 0.5°C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S sheet with lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital timer.

Optional Accessories

Timer 0-24 Hours. Automatic voltage stabilizer 3KVA (Most rec.).

Size

16 Flasks of 500ml. 25 Flasks of 250ml. 36 Flasks of 100ml.

Specification

Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.

Features

Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.

Pressure Gauge

Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units. (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour. Equipped with steam release /control valve and flexible metal exhaust tube.

Capacity (Lt.)	Power	Size	Type
21 Ltr	Electric	300 x 300mm = 12” x 12”	Mirror Finish
21 Ltr	Non Electric	300 x 300mm = 12” x 12”	Mirror Finish
27 Ltr	Electric	300 x 380mm = 12” x 15”	Mirror Finish
27 Ltr	Non Electric	300 x 380mm = 12” x 15”	Mirror Finish
37 Ltr	Electric	350 x 380mm = 14"x15"	Mirror Finish
37 Ltr	Non Electric	350 x 380mm = 14"x15"	Mirror Finish

Stroke type, barrel and piston arrangement with stroke setting for various capacity of filling tubes detachablenozzles provided for each separate capacity. All contact parts are Brass. Built on cast iron body. Cap. 5gm to 50gm