Meter Scale, Hardwood

Spherometer Laboratory • Brass dial head 40 mm diameter, mounted on stainless steel screw. • Head divided into 100 divisions, reading to 0.01 mm and registering on vertical scale 10-0-10. • Frame with three legs of stainless steel. • Distance between two legs is 40 mm approximately. • Pitch 1mm.

A single beam scale, robust steel body with epoxy powder coated parts. The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each. One hanger and one slotted mass is provided to increase the capacity of the balance. When only the hanger is suspended from the end of the beam the capacity increases to 10 kg and the reading starts from 5 kg onwards on the scale up to 10 kg. On adding the slotted mass on to the hanger the capacity increases to 15 kg and the reading starts from 10 kg onwards on the scale up to 15 kg. The tray is detachable and can be easily replaced in position by sliding on to fixed plate. Second scale is provided which reads 0 to 1 kg in division of 10 gms. Making the total capacity of balance 16 kg in to 10 gms.

Vernier Calipers Double Scale • Vernier Caliper Double Scale Sturdy construction. • Measures in inches and cm. • 150 mm x 0.05 mm / 6 inch x 1/128 inch

Both sides metric or one side metric and other in feet-inches Fiber glass with PVC covering. Non-conducting, waterproof, washable, and water-resistant. Case made of zinc-coated steel sheet, covered with vinyl, & fitted with a flush winding handle. all metal fittings are chrome-plated. The Tape Measures are provided in size 5 meters, 10 meters, 15 meters, 20 meters, 25 meters, 30 meters.