Description
Error: Contact form not found.
Mini Rotary Shaker
Body made out of thick mild steel finished with powder coating.
PMDC motor used for shaking.
Platform size 300×300 mm. S.S. platform consists of 9x250ml conical flask lotus type clamps.
RPM range 50-250 RPM, Electronic variable control, with 0-60 min mechanical timer.
Mini Rotary Shaker
Workable on 220 V AC 50Hz single phase.
Optional
Digital R.P.M. indicator
Digital timer (0-99 min.)
Related products
Autoclaves / Pressure Steam Sterilizers Superior
Specification
Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.Features
Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.Pressure Gauge
Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units. (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour. Equipped with steam release /control valve and flexible metal exhaust tube.| Capacity (Lt.) | Power | Size | Type |
|---|---|---|---|
| 21 Ltr | Electric | 300 x 300mm = 12” x 12” | Mirror Finish |
| 21 Ltr | Non Electric | 300 x 300mm = 12” x 12” | Mirror Finish |
| 27 Ltr | Electric | 300 x 380mm = 12” x 15” | Mirror Finish |
| 27 Ltr | Non Electric | 300 x 380mm = 12” x 15” | Mirror Finish |
| 37 Ltr | Electric | 350 x 380mm = 14"x15" | Mirror Finish |
| 37 Ltr | Non Electric | 350 x 380mm = 14"x15" | Mirror Finish |
Autoclaves Pressure Steam Sterilizers Economy
Specification
These autoclaves are made of 10 gauge aluminum. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (not metal to metal seal). Two safety valves, pressure gauge, flexible metal rubbing to exhaust air. Includes outer stand, inner aluminum container, inner tripod stand.| Capacity (Lt.) | Power | Size | |
|---|---|---|---|
| 20 Lt. | Electric | 300 x 300mm = 12” x 12” | |
| 20 Lt. | Non Electric | 300 x 300mm = 12” x 12” | |
| 25 Lt. | Electric | 300 x 380mm = 12” x 15” | |
| 25 Lt. | Non Electric | 300 x 380mm = 12” x 15” | |
| 35 Lt. | Electric | 350 x 380mm = 14"x15" | |
| 35 Lt. | Non Electric | 350 x 380mm = 14"x15" |
Sieve Shaker Electrical Table Model (Only For 8” Dia Sieve)
Sieve shakers are used to measure particle size as part of your research or quality control applications.
Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.
Leak Test Apparatus (S.S BODY)
Ideal instrument to check blister Packs, Strip for Leak Test.
The old method of separate desiccator and the huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness.
The instrument is equipped with Diaphragm type vacuum pump gives the higher level of vacuum in shortest possible time.
Die pressed polycarbonate vacuum desiccator sustains vacuum for a long time.
A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source.
Thus avoiding the need of continues running of the vacuum pump.
| Body: | Stainless steel. 304 | |
| Desiccator: | SPolycarbonate, 8” Desicator Provided with Digital Timer | |
| Timer: | S3999 sec. Digital | |
| Vacuum Level: | S 22" Hg | |
| Current: | S 5A | |
| Voltage: | S 230 |
Permeability Cup
(S.S 304) 120mm Dia. Permeability cups for determining the water-vapor transmission of paints, varnishes, coatings, coating systems and related products.
The Permeability cup consists of a cup, seal ring and cover ring.
The seal ring is designed to prevent turning when closing the cover.
The Permeability cup is suitable for testing both self-supporting coating and non-self-supporting coatings. Water-vapor transmission is of interest for high humidity conditions.
The wet cup method is thus the reference method for determining water-vapor transmission, if agreed up on otherwise, other procedures or conditions the dry cup method may be used.
Reviews
There are no reviews yet.