Consists of telescope eyesight and an adjustable tubular spirit level, which is connected to a semicircular protractor scale and vernier marked in both slope and degrees (90°).
A magnifier glass assists in accurate reading the degree of inclination from vernier.
Ranging Rod that made of steel conduct pipe of 25mm dia.
Alternatively painted international orange & white.
Fitted with strong iron shoe at the bottom.
Sizes Available :
• Size 2 meter single
• Size 3 meter single
• Size 2 meter 2 fold
• Size 3 meter 3 fold.
The Cross-Staff was used at sea from the beginning of the 16th century until the first half of the 18th century.
It was used to measure the sun's altitude, especially at the meridian passage. With the knowledge of the sun's declination, the mariner could then obtain his latitude.
The staff is original, with the inscription.
The cross pieces are replicas. Different cross pieces were used depending on the altitude.
A different scale is on each side of the staff.
The Hand Level is a small, economical level for use with preliminary surveys to determine traveller way or cable way steel work elevations and other feasibility type site reconnaissance work.
The Abney Level is very similar to a clinometer in that it is used to measure the value of a slope by means of arc measure and grade percentage.
Specification of Abney Level
• Used to determine slope angle, tree heights etc
• Graduated 0-+/-90 degrees, 0-+/-100% on a stationary arc
• Vernier reads to 10
• Scale pointer incorporates friction thumb lock
• Includes carry case
Cylindrical brass sextant in leather case. The sextand has pull out eyepieces, silvered scale and vernier magnifier on a hinged arm.
The brass cover screws onto the base as a handle.
The leather case is embossed with a flower on both sides.
The case has an attached cover which fastens with a strap.
The inside of the case is lined with purple velvet like material.
Maker's mark on sextand, embossed stamp on case.
• Excellent shockproof function.
• Exclusive closed magnetic field, magnetically-dampened compensator.
• Friction-braked rotation and endless horizontal drive.
• Prism for viewing circular vial.
• Water, dust and dirt proof.
• Comes with a years warranty.
• Full back up and repair service available.
• The levelling staff of sturdy design that meets the requirements for intensive field work.
• The staff material should be one of the following: teak, cypress, kail, aimi, champ, hollock or aluminium alloy.
• If timber is used as staff material, then it has well seasoned, sawn in radial direction and free of defects.
• The staff is telescopic, comprising three sections without any joint in length.
• The top plate made of aluminium, anodised black.
• Length 4 m
Accessories
• Circular bubble sensitivity of 25 minutes per 2 mm run.
• Carrying case canvas.
• Plummet fittings for test and adjustment of bubble.
Reviews
There are no reviews yet.