Pulley Bench Clamp Fitting

Horizontal reading, length one meter and width 25 mm. Double scale, one edge divided in inches and tenths and other in centimeters and millimeters also available graduated in vertical readings.

Dial type, Circular Scale with hooks. Dial type, circular scale, 6 inches with suspension and load hooks with zero adjuster. Cap. : 50 kg Sub division : 200g

Both sides metric or one side metric and other in feet-inches Fiber glass with PVC covering. Non-conducting, waterproof, washable, and water-resistant. Case made of zinc-coated steel sheet, covered with vinyl, & fitted with a flush winding handle. all metal fittings are chrome-plated. The Tape Measures are provided in size 5 meters, 10 meters, 15 meters, 20 meters, 25 meters, 30 meters.

A single beam scale, robust steel body with epoxy powder coated parts. The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each. One hanger and one slotted mass is provided to increase the capacity of the balance. When only the hanger is suspended from the end of the beam the capacity increases to 10 kg and the reading starts from 5 kg onwards on the scale up to 10 kg. On adding the slotted mass on to the hanger the capacity increases to 15 kg and the reading starts from 10 kg onwards on the scale up to 15 kg. The tray is detachable and can be easily replaced in position by sliding on to fixed plate. Second scale is provided which reads 0 to 1 kg in division of 10 gms. Making the total capacity of balance 16 kg in to 10 gms.