Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Description :-
Set of eight copper pipes with tuning fork (256 Hz) to show how resonance tones can only be created from certain pipes.
O-rings are attached to the ends of the pipes which protects the tubes from the drop In.
Description :-
To study waves and to demonstrate compression, rarefaction, amplitude, wavelength, echoes, volume and pitch.
Inexpensive model for creating longitudinal/compression waves by simply pushing a Slinky along a track. Includes instructions.
Description :-
1200 x 115 x 60 mm hollow box with two fixed bridges with a one meter scale in between and with a pulley and wrest pin for wires, complete with a long movable bridge, wrest pin length, without masses.
Description :-
Set of eight copper pipes with tuning fork (256 Hz) to show how resonance tones can only be created from certain pipes.
O-rings are attached to the ends of the pipes which protects the tubes from the drop.
Includes Instructions.
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Reviews
There are no reviews yet.