Description :-
This setup consist of a metal plate and a hand vacuum pump mounted on a heavy metal base. A rubber seal is provided on top to perform a variety of bell jar experiments.
Description :-
Wooden baseboard 690 x 90 mm on four feet.
At one end are two 50 N spring balances with hooks and at the other are two wrest-pins.
With one large and two small bridges, wrest pin key and 2 steel wires, each 1 meter long, without masses.
Description :-
1200 x 115 x 60 mm hollow box with two fixed bridges with a one meter scale in between and with a pulley and wrest pin for wires, complete with a long movable bridge, wrest pin length, without masses.
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Description :-
Tuning Fork Activator is used as a surface to gently strike the tuning fork to activate vibrations.
Rubber activator is tapered so the bottom is wider for stability.
Made of solid rubber.
Description :-
On sturdy base, can be used in horizontal or vertical position. Prong size is 300 x 25 x 10 mm. Actuated by an electromagnet between the prongs, works with 6 V D.C. Amplitude of vibration can be varied by adjusting the position of the electromagnet.
Description :-
Threaded shanks, mounted on a common resonance box and having frequencies of C1 (256), E (320), G (384) and C2 (512) Hz.
Size of box 285 x 115 x 63 mm approx.
complete with hammer.
Reviews
There are no reviews yet.