Description :-
Set of eight copper pipes with tuning fork (256 Hz) to show how resonance tones can only be created from certain pipes.
O-rings are attached to the ends of the pipes which protects the tubes from the drop In.
Description :-
For measuring the resonant length of an air column driven by a tuning fork.
Comprises a brass tube 292 x 27 mm diameter fixed to a base with a sliding inner tube 305 mm long which allows the length of the air column to be varied from 350 to 530 mm.
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Description :-
For use with ripple tank, simple form.
A disc of 250 mm diameter with 12 equispaced slots and a finger hole, rotating on its axis, with handle.
Description :-
Consists of aluminum tuning forks, mallet in a wooden box.
Tuning forks are stamped with frequency and note. Set of 8
(C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512) Set of 13
(G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Reviews
There are no reviews yet.