Description
Error: Contact form not found.
V.D.R.L.Rotator (Variable Speed)
Suitable for VDRL and other agglutinating tests, blood grouping tests, for mixing of solutions in small flasks, beakers or bottles.
Platform size 300×300 mm. supplied with spring wire holder (2 nos) for holding flasks. Fixed or variable RPM range 180 RPM. with 60 min timer.
Workable on 220 v AC 50Hz single phase.
Optional
Digital R.P.M. indicator
Digital timer (0-99 min.)
Related products
Sonicator
Description
Ultrasonics (Ultrasound) is the sound which human beings cannot hear. Ultrasound utilizes frequencies from and above 18khz (18,000 cycles per sound) High frequency electrical energy is converted into ultrasound waves by means of ultrasonic Transducers, which are bonded on the base of S. Cleaning Tank. These high frequency sound waves create in the liquid countless, Microscopic vacuum Bubbles which rapidly expand and collapse.Features
Easy to operates & maintain with one piece S.S. Tank. Digital Tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications. Compact, rugged and highly durable systems. Extensively protected electronic circuits means longer and safer Operations.Specifications
Operating frequency 33 -3KHz, for all general purpose cleaning is highly recommended Input Voltage range of 170V AC- 270V AC, 50 Hz, Single phase Micro Controller based timer range 0 to 30/99 minutes. Thermostatic controlled temperature controller. (Ultra Sonic Bath),Complete S.S & Digital Temp.Controlled Capacity 2 Ltr Approx Capacity 3 Ltr Approx Capacity 6 Ltr Approx
BOD Incubator
Specification
BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.| Inner Chamber Size | Cap. | Material |
|---|---|---|
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | Aluminium |
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | S.S. |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | Aluminium |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | S.S. |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | Aluminium |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | S.S. |
Optional
Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.
Autoclave, Triple Wall, Vertical, High Pressure, Nut Locking
Specification
Triple Wall, double chamber Autoclave. The lid, ring, inner chamber, middle chamber and outer wall are made of stainless steel. The instrument is absolutely leak proof. Equipped with pressure gauze, safety valve, double safety valve, steam release valve, rubber gasket, mild steel legs for Autoclave. The autoclave can hold the in between 5psi to 20 psi. Autoclave, Triple Wall, Vertical, High Pressure, Nut Locking.| Capacity (Lt.) | Size | |
|---|---|---|
| 40 litres | (12” x 22”) | |
| 60 litres | (14” x 25”) | |
| 75 litres | (16” x 24”) | |
| 95 litres | (18” x 24”) | |
| 180 litres | (22” x 30”) |
Bacteriological Incubator
Specification
Standard Double Wall Fabrication, inner & outer chamber made of thick mild steel sheet. Painted with hammer tone paint finish. The gap between the walls is fitted with special grade glass wool. Provided with two or three removable shelves. Heating elements provided on three sides to attain quick and uniform heating in range of 30°C to 110°C + 1°C controlled by hydraulic type capillary thermostat. An L- Shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.Optional
Air circulating fan. Timer 0-24 hours.| Chamber Size In mms | Chamber Size | Cap. (App.) |
|---|---|---|
| 300x300x300 | (12"x12"x12") | 28L |
| 350x350x350 | (14"x14"x14") | 45L |
| 400x400x400 | (16"x16"x16") | 65L |
| 450x450x450 | (18"x18"x18") | 95L |
| 600x450x450 | (24"x18"x18") | 125L |
| 600x600x600 | (24"x24"x24") | 224L |
Reviews
There are no reviews yet.