Vortex Shaker (Test Tube Shaker)

Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and the huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives the higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for a long time. A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source. Thus avoiding the need of continues running of the vacuum pump.

Body:	Stainless steel. 304
Desiccator:	SPolycarbonate, 8” Desicator Provided with Digital Timer
Timer:	S3999 sec. Digital
Vacuum Level:	S 22" Hg
Current:	S 5A
Voltage:	S 230

Features

Inner Dia 12 x8" high with opening of 7" Dia neck. Detachable polishing pan for use with Tablet Coating Pan. Made Of M.s. Provided With Inner Lining Of Superior Canvas Cloth.

It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock. A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump. (Supplied without wolf bottle and vacuum/pressure pump). These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media. Filtration area is 12.5 cm and has a holding capacity of 250ml. Though the only vacuum is required for filtration, some pressure is required for flushing liquids.

SPECIFICATIONS

Material:	Stainless Steel
Branch Test:	3 Dia. 47mm
Filtration Area:	12.5 cm
Holding Capacity:	250 ml

FEATURES

Robust design. Easy to use. Rustproof.

APPLICATION

For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test

(S.S 304) 120mm Dia. Permeability cups for determining the water-vapor transmission of paints, varnishes, coatings, coating systems and related products. The Permeability cup consists of a cup, seal ring and cover ring. The seal ring is designed to prevent turning when closing the cover. The Permeability cup is suitable for testing both self-supporting coating and non-self-supporting coatings. Water-vapor transmission is of interest for high humidity conditions. The wet cup method is thus the reference method for determining water-vapor transmission, if agreed up on otherwise, other procedures or conditions the dry cup method may be used.