Orbital Shaking Incubator

Sieve shakers are used to measure particle size as part of your research or quality control applications. Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.

It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock. A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump. (Supplied without wolf bottle and vacuum/pressure pump). These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media. Filtration area is 12.5 cm and has a holding capacity of 250ml. Though the only vacuum is required for filtration, some pressure is required for flushing liquids.

SPECIFICATIONS

Material:	Stainless Steel
Branch Test:	3 Dia. 47mm
Filtration Area:	12.5 cm
Holding Capacity:	250 ml

FEATURES

Robust design. Easy to use. Rustproof.

APPLICATION

For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test

A digital photofluorometer, you can perform precise analysis of flurophors and quinine. Designed specifically for life science laboratories, this smart instrument fulfills your requirements of accurate results with the sensitivity you demand. This fluorometer is a compact system, which occupies very low bench space, while offering convenient and excellent throughput for fluorescence assays. It is a fluorometer model has been designed and manufactured for laboratories, where routine analysis of fluorophors is a prime requisite. This system uses 50 W tungsten halogen lamp, This digital fluorometer greatly enhances productivity of your laboratory, designed with latest technology, use of imported mechanical and electrical parts, imported lamp and other components; it allows you to perform fluorometric determination of quinine more quickly.

Covers entire visible range:	Excellent detection sensitivity
Compact and efficient:	Bright red seven segment LED display
Occupies low bench space:	Precise analysis of Flurophors & Quinine

Specifications

Fluoro Sensitivity:	Full-scale deflection obtained with 1 ppm quinine sulfate in 0.1 N sulphuric acid (primary wavelength 360 nm)
Display:	3 digits bright red seven segments LED display
Excitation Source:	12V, 50W Tungsten Halogen Lamp
Sensitivity Range:	Adjustable in 4 ranges
Detector:	Highly sensitive wide range photodiode/cell
Sample Test Tube Size:	15 mm (D) x 80 mm (H)
Minimum Sample:	4 ml
Power:	230 V ± 10%, 50 Hz. AC
Dimension:	260 x 335 x 160 mm (Approx.)

Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and the huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives the higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for a long time. A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source. Thus avoiding the need of continues running of the vacuum pump.

Body:	Stainless steel. 304
Desiccator:	SPolycarbonate, 8” Desicator Provided with Digital Timer
Timer:	S3999 sec. Digital
Vacuum Level:	S 22" Hg
Current:	S 5A
Voltage:	S 230