Description
[contact-form-7 404 "Not Found"]
Microprocessor Photo Colorimeter
Microprocessor Photo Colorimeter is a compact and easy to operate instrument for Photo Colorimeter analysis of any concentration.
The output is available on a 16 x 2 line alphanumeric backlit LCD display in terms of %Transmission (%T), Absorbance (Abs.), Concentration (Conc.) and K Factor.
This instrument has 100 sample storage memory and printer output facility for printing data with any dot matrix printer.
The use of microcontroller has made it extremely versatile and accurate instrument.
10 mm path length matched test tubes are used for sample and blank.
The use of high class standard wide range glass filters covering 400 to 700 nm give extremely good results.
The filter setting is controlled by a rotating disc having 8 filters.
An automatic shutter is provided to stop the light reaching the photocell, when test tube is not inserted in the tube holder.
This increases the life of photocell tremendously.
Facility has been provided to store the last K Factor and the standard concentration value.
User can also enter any known ‘Factor’ for a test, thereby eliminating the need to re-run the standards again and again.
Specifications
| Wavelength Range | 400 – 700 nm | |
| Resolution | %T: 1, Abs: 0.01, Conc.: 0.01, K Factor: 0.01 | |
| Photometric Range | %T: 0 – 100, Abs: 0 – 1.99, Conc.: 0 – 1999, K Factor: 0 – 1999 | |
| Detector | Wide range Silicon Photodiode/Photocell | |
| Display | 16 x 2 line alphanumeric backlit LCD display | |
| Keyboard | Soft Touch Membrane Keys | |
| Data Storage | Up-to 100 Samples (0 – 99) | |
| Light Sources | 6.8 V, 0.3 Amp Tungsten Lamp | |
| Sample System | 10 mm path length matched glass test tube | |
| Filters | 400, 450, 490, 520, 540, 570, 620, 680 nm | |
| Printer Interface | Centronics Parallel Printer interface for Dot Matrix Printer | |
| Serial Interface | RS-232C interface (optional available on request) | |
| Power | 230 V ± 10% AC, 50 Hz | |
| Dimensions | (L x B x H) 240 x 254 x 90 mm (Approx.) | |
| Weight | 2.5 Kg (Approx.) |
Accessories
Matched Test Tube: A set of 5, Spare Lamp, Mains Lead, Operation Manual and Dust Cover.
Related products
Autoclave, Radial Locking
Specification
Double wall chamber Autoclave. The inner chamber and outer wall made of stainless steel, ring made of stainless steel/ mild steel. The lid is made of stainless steel tightened by radial arms through a steering wheel made of chrome plated mild steel. The instrument is absolutely leak proof. Equipped with pressure gauze, safety valve, double safety valve, steam release valve, rubber gasket, inner container, S.S bucket and mild steel legs for Autoclave. The Autoclave can hold the in between 5psi to 20 psi. Autoclave, Vertical, Double Walled, Radial Locking.| Capacity (Lt.) | Size | |
|---|---|---|
| 23 litres | (10” x 18”) | |
| 40 litres | (12” x 22”) | |
| 52 litres | (14” x 22”) | |
| 60 litres | (14” x 25”) | |
| 75 litres | (16” x 24”) | |
| 95 litres | (18” x 24”) | |
| 180 litres | (22” x 30”) |
Disintegration Test Unit
Features
Digital timer with 1 second resolution. Accurate time out provided by microprocessor based time totalizer. Baskets move Up & Down as per IP/USP test specifications. Temperature Controlled by sensitive thermostats. Digital Tablet Disintegration Apparatus is designed for accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test to batches of six tablets, simultaneously. The unit consists of two beakers having capacity of 1000 cc each. In these beakers, suitable disintegration media can be taken. These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument. Microprocessor based time to talizer is provided for accurate time readout.Specifications
System :Digital Tablet Disintegration Apparatus. Up and Down Speed:30 rpm ± 2 rpm. Accuracy: 2% Resolution:1 sec. Operating Temp. Range:0 - 100°C Power:230V ± 10%, 50Hz.AC
Sieve Shaker Electrical Table Model (Only For 8” Dia Sieve)
Sieve shakers are used to measure particle size as part of your research or quality control applications.
Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.
Orbital Shaking Incubator cum B.O.D
Specification
Orbital shaking incubator cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S sheet duly powder coated & inner chamber is made of thick S.S. sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5°C to 60°C. The temperature is controlled by Dual Display Microprocessor PID Temperature Indicator cum Controller with a accurancy of + 0.5°C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S sheet with lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital timer.Optional Accessories
Timer 0-24 Hours. Automatic voltage stabilizer 3KVA (Most rec.).Size
16 Flasks of 500ml. 25 Flasks of 250ml. 36 Flasks of 100ml.
Laminar Air Flow
Product Details
| Material | : | STAINLESS STEEL |
| Model | : | Horizontal |
| Switches | : | Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer) |
| Pre-filter | : | 99.00% down to 5 micron. |
| HEPA Filter | : | 99.97%-99.99% down to 0.3 micron, Mesh guard for protection. |
| Airflow | : | Frontward Horizontally |
| Noise Level | : | 60 decibel ± 5%. |
| Velocity | : | 0.35-0.50m/sec. |
| Work Table | : | Made up of stainless steel 304gr. Cock for gas on work table. |
| Side Panels | : | 6mm±.5mm thick acrylic sheet. |
| Front door | : | Made of acrylic. |
| UV Lamp | : | 15/30W, make Philips Holland, |
| Illumination | : | LED White Light. |
| Pressure | : | Digital Manometer 0-50mm range with filter failure alarm. |
| Power Supply | : | 230V ± 10V/50 Hz single phase A.C. |
| Cabinet | : | 304 grade. Stainless Steel. |
| Heavy Duty Blower | : | Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor. |
Reviews
There are no reviews yet.