Autoclave, Triple Wall, Vertical, High Pressure, Nut Locking

Specifications

We deal in of horizontal laminar air flow that finds it applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters and ensure smooth functionality. Direction of flow: Horizontal. Cleanliness: CLASS 100. Velocity: 90 FPM + / -20%. Hepa Filter: Size and QTY. will depend on the Size selected. Particle retention: Above 0. 3 micron. Blower Assembly: 1 / 3 HP, 1440 RPM. Noise level: 65 decibel + / -5%. Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM). Vibration level: < 2. 5 micron.

Sizes mm.

60x60x60 90x60x60 120x60x60

Specification

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.

Inner Chamber Size	Cap.	Material
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	Aluminium
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	S.S.
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	Aluminium
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	S.S.
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	Aluminium
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	S.S.

Optional

Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.

Sieve shakers are used to measure particle size as part of your research or quality control applications. Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.

Product Details

Material	:	STAINLESS STEEL
Model	:	Horizontal
Switches	:	Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
Pre-filter	:	99.00% down to 5 micron.
HEPA Filter	:	99.97%-99.99% down to 0.3 micron, Mesh guard for protection.
Airflow	:	Frontward Horizontally
Noise Level	:	60 decibel ± 5%.
Velocity	:	0.35-0.50m/sec.
Work Table	:	Made up of stainless steel 304gr. Cock for gas on work table.
Side Panels	:	6mm±.5mm thick acrylic sheet.
Front door	:	Made of acrylic.
UV Lamp	:	15/30W, make Philips Holland,
Illumination	:	LED White Light.
Pressure	:	Digital Manometer 0-50mm range with filter failure alarm.
Power Supply	:	230V ± 10V/50 Hz single phase A.C.
Cabinet	:	304 grade. Stainless Steel.
Heavy Duty Blower	:	Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor.

Working Area Size

60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.