Autoclave Vertical Sterilizer

It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock. A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump. (Supplied without wolf bottle and vacuum/pressure pump). These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media. Filtration area is 12.5 cm and has a holding capacity of 250ml. Though the only vacuum is required for filtration, some pressure is required for flushing liquids.

SPECIFICATIONS

Material:	Stainless Steel
Branch Test:	3 Dia. 47mm
Filtration Area:	12.5 cm
Holding Capacity:	250 ml

FEATURES

Robust design. Easy to use. Rustproof.

APPLICATION

For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test

Specification

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.

Inner Chamber Size	Cap.	Material
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	Aluminium
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	S.S.
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	Aluminium
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	S.S.
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	Aluminium
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	S.S.

Optional

Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.

Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan. This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch). Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil. Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized. This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.

Product:	Gyratory Sieve Shaker
Capacity:	7 sieves of 150mm, 6 sieves of 300mm
Design:	Table Top
Construction:	Cast Iron, Painted Mild steel
Motor:	¼ HP
Timer:	0 - 60 Minutes
Timer Type:	Digital / Analog
Power Supply:	220 Volts

Stroke type, barrel and piston arrangement with stroke setting for various capacity of filling tubes detachablenozzles provided for each separate capacity. All contact parts are Brass. Built on cast iron body. Cap. 5gm to 50gm