Description
Error: Contact form not found.
Metabolic Cage for Rat
Description
Animal waste is directed through a collection funnel and onto a linear diffuser guide.
The diffuser guide allows solid matter to travel down the top ridges of a 50% incline, passing over a urine port, and into a fecal collection vessel.
Liquid waste flows along grooves down the inclined diffuser guide, passing through the urine port, and into a urine collection vessel.
A urine deflector prevents excess urine from splashing and contaminating fecal specimen.
Separate urine and feces samples are collected in two separate tubes.
Features
Reliable experiment results due to better separation efficiency
Food hopper design reducing the access or stay of animal inside food hopper
Practicality of use due to less components or parts
| Minimal animal stress: | Sample removing is without stressing animal, access to all elements below the cage floor without disturbing animal |
| Durability: | Most components are made from autoclavable polycarbonate and S.S. 304 material |
| Versatility: | Unit accommodates various species with simple feeder and floor change Space saving |
| Economy: Few parts, simple and rapid assembling |
Components Included
Polycarbonate cage with lid
Polycarbonate collection funnel
S.S. 304 floor grill for Mice and Rat
Polycarbonate Linear diffuser guide
Urine collection tube P.P.
Feces collection tube P.P.
Polycarbonate water bottle 250ml with holder
Waste water collection tube P.P.
Polycarbonate collection funnel
S.S. 304 floor grill for Mice and Rat
Polycarbonate Linear diffuser guide
Urine collection tube P.P.
Feces collection tube P.P.
Polycarbonate water bottle 250ml with holder
Waste water collection tube P.P.
Related products
BOD Incubator
Specification
BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.| Inner Chamber Size | Cap. | Material |
|---|---|---|
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | Aluminium |
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | S.S. |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | Aluminium |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | S.S. |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | Aluminium |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | S.S. |
Optional
Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.
Laminar Air Flow
Product Details
| Material | : | STAINLESS STEEL |
| Model | : | Horizontal |
| Switches | : | Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer) |
| Pre-filter | : | 99.00% down to 5 micron. |
| HEPA Filter | : | 99.97%-99.99% down to 0.3 micron, Mesh guard for protection. |
| Airflow | : | Frontward Horizontally |
| Noise Level | : | 60 decibel ± 5%. |
| Velocity | : | 0.35-0.50m/sec. |
| Work Table | : | Made up of stainless steel 304gr. Cock for gas on work table. |
| Side Panels | : | 6mm±.5mm thick acrylic sheet. |
| Front door | : | Made of acrylic. |
| UV Lamp | : | 15/30W, make Philips Holland, |
| Illumination | : | LED White Light. |
| Pressure | : | Digital Manometer 0-50mm range with filter failure alarm. |
| Power Supply | : | 230V ± 10V/50 Hz single phase A.C. |
| Cabinet | : | 304 grade. Stainless Steel. |
| Heavy Duty Blower | : | Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor. |
Working Area Size
60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.
Autoclaves / Pressure Steam Sterilizers Superior
Specification
Superior quality & finish. All these autoclaves are made of 8 gauge aluminum. The drum is deep drawn. The lid is die casted. Locking of lid by 6 nuts with rubber gasket seal in between (no metal to metal seal). Two safety valves, pressure gauge, flexible metal tubing to exhaust air. Includes outer stand, inner tripod stand.Features
Equipped with two stages "over pressure" protection system incorporating a calibrated continuous bleeding Pressure stopcock and pressure release weight valve.Pressure Gauge
Colour coded pressure gauge showing internal chamber conditions during the cycle. Sterilization zone in green colour is shown from 15 psi to 20 psi (or 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c. Dial size : 2.5". Dial show measurement in 2 units. (i) kg/cm2 (ii) lb/inch2 Full scale dial of pressure gauge is 0-30 lb/ inch2 or 0-2 kg/cm2 Caution zone in red colour. Equipped with steam release /control valve and flexible metal exhaust tube.| Capacity (Lt.) | Power | Size | Type |
|---|---|---|---|
| 21 Ltr | Electric | 300 x 300mm = 12” x 12” | Mirror Finish |
| 21 Ltr | Non Electric | 300 x 300mm = 12” x 12” | Mirror Finish |
| 27 Ltr | Electric | 300 x 380mm = 12” x 15” | Mirror Finish |
| 27 Ltr | Non Electric | 300 x 380mm = 12” x 15” | Mirror Finish |
| 37 Ltr | Electric | 350 x 380mm = 14"x15" | Mirror Finish |
| 37 Ltr | Non Electric | 350 x 380mm = 14"x15" | Mirror Finish |
Flourimeter (Digital)
A digital photofluorometer, you can perform precise analysis of flurophors and quinine.
Designed specifically for life science laboratories, this smart instrument fulfills your requirements of accurate results with the sensitivity you demand.
This fluorometer is a compact system, which occupies very low bench space, while offering convenient and excellent throughput for fluorescence assays.
It is a fluorometer model has been designed and manufactured for laboratories, where routine analysis of fluorophors is a prime requisite.
This system uses 50 W tungsten halogen lamp,
This digital fluorometer greatly enhances productivity of your laboratory, designed with latest technology, use of imported mechanical and electrical parts, imported lamp and other components; it allows you to perform fluorometric determination of quinine more quickly.
| Covers entire visible range: | Excellent detection sensitivity | |
| Compact and efficient: | Bright red seven segment LED display | |
| Occupies low bench space: | Precise analysis of Flurophors & Quinine |
Specifications
| Fluoro Sensitivity: | Full-scale deflection obtained with 1 ppm quinine sulfate in 0.1 N sulphuric acid (primary wavelength 360 nm) | |
| Display: | 3 digits bright red seven segments LED display | |
| Excitation Source: | 12V, 50W Tungsten Halogen Lamp | |
| Sensitivity Range: | Adjustable in 4 ranges | |
| Detector: | Highly sensitive wide range photodiode/cell | |
| Sample Test Tube Size: | 15 mm (D) x 80 mm (H) | |
| Minimum Sample: | 4 ml | |
| Power: | 230 V ± 10%, 50 Hz. AC | |
| Dimension: | 260 x 335 x 160 mm (Approx.) |
Autoclaves Pressure Steam Sterilizers Economy
Specification
These autoclaves are made of 10 gauge aluminum. The drum is deep drawn & the ring on top is riveted. The lid is made by casting. Locking of lid by 6 nuts with rubber gasket seal in between (not metal to metal seal). Two safety valves, pressure gauge, flexible metal rubbing to exhaust air. Includes outer stand, inner aluminum container, inner tripod stand.| Capacity (Lt.) | Power | Size | |
|---|---|---|---|
| 20 Lt. | Electric | 300 x 300mm = 12” x 12” | |
| 20 Lt. | Non Electric | 300 x 300mm = 12” x 12” | |
| 25 Lt. | Electric | 300 x 380mm = 12” x 15” | |
| 25 Lt. | Non Electric | 300 x 380mm = 12” x 15” | |
| 35 Lt. | Electric | 350 x 380mm = 14"x15" | |
| 35 Lt. | Non Electric | 350 x 380mm = 14"x15" |
Sieve Shaker Electrical Table Model (Only For 8” Dia Sieve)
Sieve shakers are used to measure particle size as part of your research or quality control applications.
Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.
Reviews
There are no reviews yet.