Description :-
This setup consist of a metal plate and a hand vacuum pump mounted on a heavy metal base. A rubber seal is provided on top to perform a variety of bell jar experiments.
Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Description :-
Sliding weights on each prong of tuning fork can be adjusted to deliver tones at C-128, D-144, E-160, F-170.7, G-192, A-213.3 and B-240 frequencies.
Description :-
1200 x 115 x 60 mm hollow box with two fixed bridges with a one meter scale in between and with a pulley and wrest pin for wires, complete with a long movable bridge, wrest pin length, without masses.
Description :-
Set of eight copper pipes with tuning fork (256 Hz) to show how resonance tones can only be created from certain pipes.
O-rings are attached to the ends of the pipes which protects the tubes from the drop.
Includes Instructions.
Description :-
Consists of aluminum tuning forks, mallet in a wooden box.
Tuning forks are stamped with frequency and note. Set of 8
(C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512) Set of 13
(G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Reviews
There are no reviews yet.