Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Description :-
Threaded shanks, mounted on a common resonance box and having frequencies of C1 (256), E (320), G (384) and C2 (512) Hz.
Size of box 285 x 115 x 63 mm approx.
complete with hammer.
Description :-
Sliding weights on each prong of tuning fork can be adjusted to deliver tones at C-128, D-144, E-160, F-170.7, G-192, A-213.3 and B-240 frequencies.
Description :-
Demonstrating longitudinal and transverse waves.
A number of eccentric discs move a number of metal rods.
Transverse waves are obtained by straight rods and longitudinal waves by bent rods.
Description :-
To study waves and to demonstrate compression, rarefaction, amplitude, wavelength, echoes, volume and pitch.
Inexpensive model for creating longitudinal/compression waves by simply pushing a Slinky along a track. Includes instructions.
Reviews
There are no reviews yet.