Description :-
For measuring the resonant length of an air column driven by a tuning fork.
Comprises a brass tube 292 x 27 mm diameter fixed to a base with a sliding inner tube 305 mm long which allows the length of the air column to be varied from 350 to 530 mm.
Description :-
The high quality tuning fork set covers the octave from middle to high C.
It consists of one each of 261.6C, 293.7D, 329.6E, 349.2F, 392G, 440A, 493.9B and 523.2.
Set of eight with Activator.
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Description :-
Sliding weights on each prong of tuning fork can be adjusted to deliver tones at C-128, D-144, E-160, F-170.7, G-192, A-213.3 and B-240 frequencies.
Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Reviews
There are no reviews yet.