Description :-
Set of eight copper pipes with tuning fork (256 Hz) to show how resonance tones can only be created from certain pipes.
O-rings are attached to the ends of the pipes which protects the tubes from the drop In.
Description :-
This setup consist of a metal plate and a hand vacuum pump mounted on a heavy metal base. A rubber seal is provided on top to perform a variety of bell jar experiments.
Description :-
To study waves and to demonstrate compression, rarefaction, amplitude, wavelength, echoes, volume and pitch.
Inexpensive model for creating longitudinal/compression waves by simply pushing a Slinky along a track. Includes instructions.
Description :-
Set of eight copper pipes with tuning fork (256 Hz) to show how resonance tones can only be created from certain pipes.
O-rings are attached to the ends of the pipes which protects the tubes from the drop.
Includes Instructions.
Description :- Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure.
The kit clearly demonstrates the method by which a pump works.
Also illustrates that air has mass and helps find its mass and density.
Explain the effect of surrounding air pressure on a sealed balloon.
The balloon will expand when the surrounding air is removed.
And also demonstrate that liquid boils at reduced temperature when the surrounding air pressure is reduced with instructions.
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Description :-
Consisting of 19 spheres, each mounted on a 75 mm long rod with a collar for attachment to a shaft.
The spheres are mounted at 20° intervals, equally spaced along the shaft.
The shaft rotates in two pillars mounted on a base.
Description :-
1200 x 115 x 60 mm hollow box with two fixed bridges with a one meter scale in between and with a pulley and wrest pin for wires, complete with a long movable bridge, wrest pin length, without masses.
Reviews
There are no reviews yet.