Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Description :-
Wooden baseboard 690 x 90 mm on four feet.
At one end are two 50 N spring balances with hooks and at the other are two wrest-pins.
With one large and two small bridges, wrest pin key and 2 steel wires, each 1 meter long, without masses.
Description :-
Consists of aluminum tuning forks, mallet in a wooden box.
Tuning forks are stamped with frequency and note. Set of 8
(C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512) Set of 13
(G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Description :-
Sliding weights on each prong of tuning fork can be adjusted to deliver tones at C-128, D-144, E-160, F-170.7, G-192, A-213.3 and B-240 frequencies.
Description :-
This setup consist of a metal plate and a hand vacuum pump mounted on a heavy metal base. A rubber seal is provided on top to perform a variety of bell jar experiments.
Reviews
There are no reviews yet.