Two Input and Gate

A common anode seven segment module is fitted on a board with 8 bit dip switch to control the each segment of seven segment LED display. The inputs A-D of a display driver are connected to the binary coded decimal (BCD) outputs from a decade counter. A network of logic gates inside the display driver makes its outputs a-g become high or low as appropriate to light the required segments a-g of a seven segment display. A resistor is required in series with each segment to protect the LEDs

This Trainer Consist of : 1. Regulated power supply of ± 12 V / 250 mA. 2. Variable 0 to ±5 V / 250 mA. 3. Sine wave oscillation of 1 KHz. 4. Digital Voltmeter of 0-20 V DC, LCD display, 3 ½ Digit. 5. Functional diagram of IC 741 is printed with 2 mm sockets. 6. One extra 8 pin IC Base with 2 mm sockets. 7. Potentiometer of 10K Ohms. 8. Required Resistance and Capacitances mounted on board. 9. Interconnection Leads and Manual to perform 15 experiments on IC741 e.g. inverting, non-inverting, summing, difference, multiplier, differentiator, integrator etc.

Mounted on transparent covered base for easy demonstration. Diagram and two sockets are provided for use with some circuit. Thermistor is mounted above the base to avoid the damage from heat.

Solderless Breadboard has 1680 tie points. Provided with 2 Terminal strips and 4 Distribution strips. Built in DC Regulated Power Supply. DC Supply ± 5V/ 1 Amp. 0 to ± 15V DC (Variable), 1 Amp. Built-in Function Generator. . Waveform : Sine, Square and Triangle (with selector switch), Frequency : 1 – 100 Hz Variable Amplitude : Variable up to 10 V, TTL 5V p-p Data Switches (Bounceless) – 8 No. LED Display (buffered) – 10 No. Clock Pulsar – 2 No. Seven Segment Display with Decoder IC 7447 – 2 No. Speaker 2.5” Dia. with sockets – 1 No. BNC Plug with 2 mm Sockets – 2 No. 4 mm socket connected with 2 mm sockets – 2 No. Interconnection leads having 2 mm plugs at one end – 10 No. Interconnection leads having 4 mm plugs at both end – 10 No. 22 SWG Hook Up Wire of 20 cm length – 100 No. Comprehensive User’s Manual – 1 No. Input 220 V, 50 Hz. AC with On/Off indicator.