Water Bath Recangular Type

Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan. This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch). Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil. Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized. This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.

Product:	Gyratory Sieve Shaker
Capacity:	7 sieves of 150mm, 6 sieves of 300mm
Design:	Table Top
Construction:	Cast Iron, Painted Mild steel
Motor:	¼ HP
Timer:	0 - 60 Minutes
Timer Type:	Digital / Analog
Power Supply:	220 Volts

Specification

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.

Inner Chamber Size	Cap.	Material
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	Aluminium
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	S.S.
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	Aluminium
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	S.S.
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	Aluminium
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	S.S.

Optional

Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.

A digital photofluorometer, you can perform precise analysis of flurophors and quinine. Designed specifically for life science laboratories, this smart instrument fulfills your requirements of accurate results with the sensitivity you demand. This fluorometer is a compact system, which occupies very low bench space, while offering convenient and excellent throughput for fluorescence assays. It is a fluorometer model has been designed and manufactured for laboratories, where routine analysis of fluorophors is a prime requisite. This system uses 50 W tungsten halogen lamp, This digital fluorometer greatly enhances productivity of your laboratory, designed with latest technology, use of imported mechanical and electrical parts, imported lamp and other components; it allows you to perform fluorometric determination of quinine more quickly.

Covers entire visible range:	Excellent detection sensitivity
Compact and efficient:	Bright red seven segment LED display
Occupies low bench space:	Precise analysis of Flurophors & Quinine

Specifications

Fluoro Sensitivity:	Full-scale deflection obtained with 1 ppm quinine sulfate in 0.1 N sulphuric acid (primary wavelength 360 nm)
Display:	3 digits bright red seven segments LED display
Excitation Source:	12V, 50W Tungsten Halogen Lamp
Sensitivity Range:	Adjustable in 4 ranges
Detector:	Highly sensitive wide range photodiode/cell
Sample Test Tube Size:	15 mm (D) x 80 mm (H)
Minimum Sample:	4 ml
Power:	230 V ± 10%, 50 Hz. AC
Dimension:	260 x 335 x 160 mm (Approx.)

Product Details

Material	:	STAINLESS STEEL
Model	:	Horizontal
Switches	:	Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
Pre-filter	:	99.00% down to 5 micron.
HEPA Filter	:	99.97%-99.99% down to 0.3 micron, Mesh guard for protection.
Airflow	:	Frontward Horizontally
Noise Level	:	60 decibel ± 5%.
Velocity	:	0.35-0.50m/sec.
Work Table	:	Made up of stainless steel 304gr. Cock for gas on work table.
Side Panels	:	6mm±.5mm thick acrylic sheet.
Front door	:	Made of acrylic.
UV Lamp	:	15/30W, make Philips Holland,
Illumination	:	LED White Light.
Pressure	:	Digital Manometer 0-50mm range with filter failure alarm.
Power Supply	:	230V ± 10V/50 Hz single phase A.C.
Cabinet	:	304 grade. Stainless Steel.
Heavy Duty Blower	:	Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor.

Working Area Size

60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.