Showing 1–12 of 18 results

Ballistic Galvano Meters

Description

Used for measurement of small quantities of electrical charge. Levelling Screws for balancing the coil. Coil with mirror suspended between long suspension at the upper end and a spring at lower end. Clamping arrangement for transportation. Consistent sensitivity over a large period. Strip provided for making it a periodic. Res. in Ohm Crit. Damp. Res. in Ohms Sensitivity mm per m Coul. Sensitivity mm per m Amp. Time period in Seconds.
1003001000122000
5006001400123500

Demonstration Meter

Description

In a rectangular transparent plastic case, provides clear view into the working of meter. Moving coil type, can be supplied as ammeter, voltmeter or galvanometer 4 mm terminals.
GalvanometerVoltmeterAmmeter
30-0-300 to 5, 10, 50, 250V0 to 1, 1.5, 3, 5A

Demonstration Meter Inter Scale

Description

Housed in a ABS plastic case 300x150x300 mm with glass front and rear. Moving coil type with accuracy of + 2.5%. Basic sensitivity of meter is 5 mA, 100mV f.s.d. The meter can be used to demonstrate the working principle of AC or DC ammeters or voltmeters with the interchangeable plastic scales. DIFFERENT DIALS ARE AVAILABLE.

Dial Interchangeable

Description

For use with Meter Interchangeable. Each dia, comprises a laminated plastic panel 315x115mm with a sealed moulded box at one end which contains the shunt or voltage multiplier appropriate to the scale.

Digital Meters

Description

Portable type, having large display of 3½ digits, type LCD, power 9 Volts battery, accuracy + 1 digit, size 125x65 mm. DC voltage ranges 0-199.9 mV 0-1.99 V 0-19.9 V 0-199.9 V DC current larges 0-199.9 mA 0-1.99 mA 0-19.9 mA 0-199.9mA 0-10 Amp.

Digital Multi Meter

Description

D.C. Voltage200mV-1000V +0.5% +2 digits 
A.C. Voltage200V-750V +1.2% +10 digits 
D.C. Current200mA-10A +1% + digits 
Resistance200Ohms-2000kOhms+0.8%+2 digits 
Max. Display1999 
Display Size16x48mm., 3½digits LCD 
RangeManual 
Transistor TestYes Standard 
AccessoriesBattery, Testing Probes with Instruction Manual, in case, CE Marked 

Galvano Meter

Description

Moving coil D.C. only, with 4 mm. terminals. 1-0-1 mA. 35-0-35 mV. 3.5-0-3.5 mA. 30-0-30 Sensivity 20 mA / Div. are also available.

Milli Ammeters Dual

Description

Moving coil, D.C. only, single range 0-1, 5, 10, 30, 50, 100, 500 mA.

Mounted Joule Meter

Description

A domestic electricity meter adopted to operate single-phase 2, wire C1.2mAx8.33 A 12V 50 Hz. 0.01 rev./J and dials reading in joules. The meter is mounted on a wooden bench stand input and output socket terminals. The aluminium disc rotates once for every 100 Joules with the consumption recorded on three digits calibrated 100, 1000 and 10000 joules per division respectively. The instrument records a maximum of 99,900 Joules.

Moving Coil Meters

Description

Meters are designed for D.C. measurements to meet every need of schools, colleges and technical institutions. All meters are housed in moulded dust proof cases with zero-adjuster and have connections terminals. Type MO-65 Round.
Case:ABS Plastic 
Accuracy:Class 2.5 
Scale length:50 mm. 
Overall size:100x90x90 mm. approx. 

Moving Coil Multi Range Meter

Description

For DC & AC current and voltage. The operation of these meters depend on the reaction of the current circulating in the moving coil and a field of a fixed permanent magnet. Considering the operational nature and design of these instruments. the scale is linear. Since, the direction of the movement rotation depends on the direction of the current flow (polarity) in the circuit. The moving coil multirange meter can be used on direct current circuit and also alternating current with a suitable rectifier inserted in the circuit.
AccuracyDC + F.S.D. & AC + 2.5 F.S.D.
Scale Length60 mm approx. with knife edge pointer and anti parallel mirror scale.
Dial Size80x80 mm, rectangular.
Moving Coil Multirange Voltmeter has following rangesDC & AC 0-5 - 25 - 50 - 100 - 250 - 500V
Moving Coil Multirange Ammeter has following rangesDC & AC 10 mA - 100mA - 500 mA - 1A - 2.5A - 5A

Ohm’s Meter

Description

Ohm's meter is designed for measuring the resistance in electric circuits. It is housed in unbreakable case with front clear cover. The dry battery cell is fixed to stand from the bottom side.
SHUNT Type0-2 KWSERIES Type0-100 W