Jolly's thermometer bulb connected via a 3-way stopcock to mercury tube.
Sliding indicator on right hand limb with reservoir sliding on vertical clamping rod.
Metal vessel to surround the bulb.
Mounted on wooden stand, height 740 mm.
All glass parts except reservoir are made of borosilicate glass.
Consisting of a joint less copper calorimeter 75 x 50 mm on rubber supports, spun outer copper vessel of 100 x 75 mm diameter copper lid for outer vessel with central tubule for thermometer and slit for copper stirrer with a looped copper stirrer for the inner vessel.
A 500 mm long metal rod is supported in a plated brass tube with three tubules for steam inlet, outlet and thermometer.
The tube is mounted on a stand with an adjusting screw at one end and a micrometer screw reading to 0.01 mm on the other, with terminals for connecting a bell or galvanometer to indicate contact.
With copper, brass and iron test rods but without thermometer.
To determine the co-efficient of absolute expansion of mercury.
Glass tubes with vertical limbs contained within glass jackets approx.
460 x 25 mm height x diameter are closed by bungs and fitted with inlet and outlet tubes.
Upper ends of these vertical limbs are angled on emergence from the jackets to produce two short, adjacent limbs placed against a silvered glass scale 0 to 12 cm x 1 mm.
Mounted on stand 610 x 230 mm, height x width.
Overall height 750 mm approx.
supplied without mercury.
Two cast metal uprights, height 18 cm, fitted with two nickel plated rods supporting expansion bar of length 38 cm.
Expansion bar is fixed to one upright and moves a pointer on the other, when heated With scale reading 0 to 90°, supplied with one each, aluminium, brass and iron expansion bars.
Comprising two castÂmetal uprights linked by a pair of parallel plated metal support rods and supporting an expansion bar at the top. Supplied with expansion bars.
Comprising two cast-iron uprights, height 18 cm linked by two nickel plated rods supporting on expansion bar, length 38 cm fixed to one upright and resting on a friction pointer placed at the other.
Supplied with scale reading 0 to 90 deg and one each of aluminium, brass and iron expansion bars.
Consists of a thick brass calorimeter 90 x 65 mm, a bung with steam inlet and outlet tubes, a felt cover and a one liter brass sheet boiler with bung to take the steam tube.
Copper calorimeter of 75 x 50 mm resting on felt pad inside wooden polished box provided with a brass nickel plated thermometer holder and copper stirrer.
Reviews
There are no reviews yet.