Dissolution Rate Test Apparatus

The unit is recommended for making pyrogen fee distilled water of a very high degree of purity, Made out of S.S. special kettle element is fitted with Ejection Device / Auto cut for safety of the element is provided water supply is stopped. The cork fitted to the unit is of brass C.P.A. wall Mounting clamp is provided with the unit. Supplied with cord and plug to work on 220/240 volts A.C. Stainless Steel, Output approx. 3/4 Ltr./Hr. Stainless Steel, Output approx. 5/6 Ltr./Hr. Aluminium Dicasted, Output approx. 3/4 Ltr./Hr. Aluminium Dicasted, Output approx. 5/6 Ltr./Hr.

Product Details

Material	:	STAINLESS STEEL
Model	:	Horizontal
Switches	:	Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
Pre-filter	:	99.00% down to 5 micron.
HEPA Filter	:	99.97%-99.99% down to 0.3 micron, Mesh guard for protection.
Airflow	:	Frontward Horizontally
Noise Level	:	60 decibel ± 5%.
Velocity	:	0.35-0.50m/sec.
Work Table	:	Made up of stainless steel 304gr. Cock for gas on work table.
Side Panels	:	6mm±.5mm thick acrylic sheet.
Front door	:	Made of acrylic.
UV Lamp	:	15/30W, make Philips Holland,
Illumination	:	LED White Light.
Pressure	:	Digital Manometer 0-50mm range with filter failure alarm.
Power Supply	:	230V ± 10V/50 Hz single phase A.C.
Cabinet	:	304 grade. Stainless Steel.
Heavy Duty Blower	:	Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor.

Working Area Size

60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.

A digital photofluorometer, you can perform precise analysis of flurophors and quinine. Designed specifically for life science laboratories, this smart instrument fulfills your requirements of accurate results with the sensitivity you demand. This fluorometer is a compact system, which occupies very low bench space, while offering convenient and excellent throughput for fluorescence assays. It is a fluorometer model has been designed and manufactured for laboratories, where routine analysis of fluorophors is a prime requisite. This system uses 50 W tungsten halogen lamp, This digital fluorometer greatly enhances productivity of your laboratory, designed with latest technology, use of imported mechanical and electrical parts, imported lamp and other components; it allows you to perform fluorometric determination of quinine more quickly.

Covers entire visible range:	Excellent detection sensitivity
Compact and efficient:	Bright red seven segment LED display
Occupies low bench space:	Precise analysis of Flurophors & Quinine

Specifications

Fluoro Sensitivity:	Full-scale deflection obtained with 1 ppm quinine sulfate in 0.1 N sulphuric acid (primary wavelength 360 nm)
Display:	3 digits bright red seven segments LED display
Excitation Source:	12V, 50W Tungsten Halogen Lamp
Sensitivity Range:	Adjustable in 4 ranges
Detector:	Highly sensitive wide range photodiode/cell
Sample Test Tube Size:	15 mm (D) x 80 mm (H)
Minimum Sample:	4 ml
Power:	230 V ± 10%, 50 Hz. AC
Dimension:	260 x 335 x 160 mm (Approx.)

Specification

Double wall chamber Autoclave. The inner chamber and outer wall made of stainless steel, ring made of stainless steel/ mild steel. The lid is made of stainless steel tightened by radial arms through a steering wheel made of chrome plated mild steel. The instrument is absolutely leak proof. Equipped with pressure gauze, safety valve, double safety valve, steam release valve, rubber gasket, inner container, S.S bucket and mild steel legs for Autoclave. The Autoclave can hold the in between 5psi to 20 psi. Autoclave, Vertical, Double Walled, Radial Locking.

Capacity (Lt.)	Size
23 litres	(10” x 18”)
40 litres	(12” x 22”)
52 litres	(14” x 22”)
60 litres	(14” x 25”)
75 litres	(16” x 24”)
95 litres	(18” x 24”)
180 litres	(22” x 30”)