Distillation Plant (Manasty Type), Wall Hanging

Specification

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.

Inner Chamber Size	Cap.	Material
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	Aluminium
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	S.S.
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	Aluminium
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	S.S.
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	Aluminium
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	S.S.

Optional

Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.

Sieve shakers are used to measure particle size as part of your research or quality control applications. Sieve shakers provide uniform motion to ensure the reproducible results you can’t get from hand sieving. Electrically operated Fitted with Electric Motor inside the Body having speed regulator to increase of discrease the vibration. The table sieve shaker having the capacity of 8 Sieves.

Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and the huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives the higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for a long time. A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source. Thus avoiding the need of continues running of the vacuum pump.

Body:	Stainless steel. 304
Desiccator:	SPolycarbonate, 8” Desicator Provided with Digital Timer
Timer:	S3999 sec. Digital
Vacuum Level:	S 22" Hg
Current:	S 5A
Voltage:	S 230

Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan. This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch). Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil. Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized. This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.

Product:	Gyratory Sieve Shaker
Capacity:	7 sieves of 150mm, 6 sieves of 300mm
Design:	Table Top
Construction:	Cast Iron, Painted Mild steel
Motor:	¼ HP
Timer:	0 - 60 Minutes
Timer Type:	Digital / Analog
Power Supply:	220 Volts