pH Meter, Digital, Table Model

Specification

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.

Inner Chamber Size	Cap.	Material
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	Aluminium
455 x 410 x 610 mm	4cu. Ft. or 112 Ltr.	S.S.
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	Aluminium
505 x 451 x 830 mm	6cu. Ft. or 171 Ltr.	S.S.
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	Aluminium
565 x 565 x 865 mm	10cu. Ft. or 280 Ltr.	S.S.

Optional

Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.

Specification

Orbital shaking incubator cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S sheet duly powder coated & inner chamber is made of thick S.S. sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5°C to 60°C. The temperature is controlled by Dual Display Microprocessor PID Temperature Indicator cum Controller with a accurancy of + 0.5°C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S sheet with lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital timer.

Optional Accessories

Timer 0-24 Hours. Automatic voltage stabilizer 3KVA (Most rec.).

Size

16 Flasks of 500ml. 25 Flasks of 250ml. 36 Flasks of 100ml.

Specifications

This unit has a double wall stainless steel construction and the gap is insulated with glass wool. This device works on 220V AC.

Capacity

8-9 liters per hour Output Capacity 8 to 9 Ltr/Hr. (Approx.) Output Capacity 15 to 16 Ltr/Hr. (Approx.)

Product Details

Material	:	STAINLESS STEEL
Model	:	Horizontal
Switches	:	Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer)
Pre-filter	:	99.00% down to 5 micron.
HEPA Filter	:	99.97%-99.99% down to 0.3 micron, Mesh guard for protection.
Airflow	:	Frontward Horizontally
Noise Level	:	60 decibel ± 5%.
Velocity	:	0.35-0.50m/sec.
Work Table	:	Made up of stainless steel 304gr. Cock for gas on work table.
Side Panels	:	6mm±.5mm thick acrylic sheet.
Front door	:	Made of acrylic.
UV Lamp	:	15/30W, make Philips Holland,
Illumination	:	LED White Light.
Pressure	:	Digital Manometer 0-50mm range with filter failure alarm.
Power Supply	:	230V ± 10V/50 Hz single phase A.C.
Cabinet	:	304 grade. Stainless Steel.
Heavy Duty Blower	:	Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor.

Working Area Size

60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.