XTEMOS ELEMENT
AJAX PRODUCTS TABS
Heat Transfer Activity
Android Based WSN Evaluation Kit
We are pleased to introduce a trainer which offers all the components (ARM 11 processor Board + GSM module + CMOS Camera + GPS module + ZigBee module +SD Wi-Fi module) of a Smart Cell Phone which works on Android OS which also Occupies 50% of the smart cell phone market. This Development Board gives you an Comprehensive solution integrating both hardware and software. These features make it easily and widely used in MID development, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is good for educational training, embedded development and DIY as well.
Features
• ARM11 Samsung S3C6410, ARM1176JZF-S, up to 667MHz • 256MByte mDDR RAM and 1GByte NAND Flash • 1 x 4-wire resistor touch screen interface, • 1 x 100M Ethernet interface, • 1 x DB9 5-wire serial port • 1 x Mini USB 2.0-OTG interface and USB Host 1.1 interface, • 1 x 3.5mm audio output and on board microphone interface, • 1 x TV-OUT • 1 x SD card socket, • 1 x Infrared receiver, • 4 x TTL serial port, • 1 x CMOS camera interface, • 1 x SDIO2 interface (can be connected to SD WiFi module), • 1 x 10pin JTAG interface, • 1 x PWM buzzer, • 1 x I2C-EEPROM, • 1 x backup battery for RTC, • 1 x AD adjustable resistor, • 8 x User button and 4 x LED
Magnetic Numbers
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Analog PID Controller
The analog PID controller is a special purpose analog controller with operational amplifiers The controller permits a detailed analysis of the application of proportional, integral and derivative control to the improvement of their performance. The controller may be used at high speed for oscilloscope observation or at a low speed for meter observation.
FEATURES:
• Two analog meters (centre zero meters) to display the set variable and process variable. • In built regulated power supply. • Provision to vary and measure the setpoint (0-5)V • Provision to vary the proportional gain, Integral time and derivative gain. • Provision to give either (4-20)mA or (0-5)V externally as a process variable. • Provision to select the controller output as (4-20)mA or (0-5)V internally. • All the components are mounted in an attractive cabinet. • Interface with any realtime process (Level, Flow, Temperature, Pressure, DC motor speed control etc.,)
Pressure Measurement Trainer
This module consists of a (0-100) psi pressure transducer of strain gauge type fixed in a pressure tank, one manually operated pump to develop pressure, pressure gauge and 3½ digital indicator to display the pressure.
Specification
• One metal pressure tank fitted with strain gauge type pressure cell. • A ball valve fitted in a pressure tank to release the pressure. • Bourden type pressure gauge provided in the tank to indicate pressure. • One manually operated foot pump to generate a pressure of the tank. • Signal conditioner for pressure cell output (0-5V) • Provision for offset/span adjustment. • A 3½ digit digital display indicator to indicate the pressure inside the tank
Corcyra Egg Laying Cage
Description
Frame made of MDF sheet planks. Fine wire mesh provided on top and bottom fitted with 3mm dia hole wire mesh on one top, a rounded opening 3cm dia is provided which can be closed with wooden plug. On one side a rounded opening 11cm with an arrangement for drop clouser with the help of MDF sheet cover is provided for manually putting in/taking out the material. Size 35x25x18cmXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Car Chassis Rear Wheel Drive Actual Cut Section Motorised
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
Hydraulic Ram Test Setup
DESCRIPTION:
The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement.EXPERIMENT:
Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAMFEATURES:
Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & MaintainUTILITIES REQUIRED:
Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.) Ø Air Vessel : Suitable Capacity MOC SS Ø Delivery Line : For RAM, Dia 50 mm Length 6 m. Ø Pump : Capacity 1 HP, Crompton / Sharp / Hero make Ø Supply Tank : Capacity 150 Ltrs. Ø Overhead Tank : Capacity 100 Ltrs. Ø Measuring Tank : Suitable Capacity one each for useful and waste MOC SS fitted (2 Nos.) with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Pressure Gauge : Bourdon Type Ø Control Panel : Comprises of Standard make On/Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel. Ø The whole Set-up is well designed and arranged in a good quality painted structure.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Gear Box Actual Cut Section
Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Seeds & Fruits
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Maize seed germination Gram seed germination Bean seed germination Castor seed germination Pea seed germination Dispersal of seeds & fruits Classification of fruits
Counters
Simple Galvanoscope
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Advanced Delivery Mechanism Demonstration Simulator
Description
Demonstrate the whole process of delivery. Demonstrate the fetus, umbilical cord and placenta of vacuum-assisted delivery, flexible fetal joint and multiple normal and abnormal positions of fetal delivery can be shown. Can practice and master the comprehensive skills of normal labor, abnormal labor (dystocia), midwifery, and perineum protection. Available Training of multiple pregnancies (twin pregnancy). Component: A (Matrix for delivery Demonstration)* El (Fetus for Demonstration).
Air Conditioning Trainer General Cycle Type
The unit consists of ducting fitted with various air conditioning components. Airflow is generated by an axial flow fan and in the airflow, heaters, cooling coil and steam humidifier connection is provided. Cooling circuit consists of a hermetic compressor; air cooled condenser, thermostatic expansion valve and evaporator (i.e. cooling coil). Measurements of various parameters Torn cooling cycle and heating cycle are provided and students can easily visualize and understand the basic principles of air conditioning.
SPECIFICATIONS:
1.Cooling circuits – It consists of: a) Hermetic compressor, having the capacity of 2/3 ton of refrigeration (approx.) using R-22 refrigerant. b) Rotameter for liquid refrigerant flow measurement. c) Pressure gauges for high and low pressure. d) Prescott (i.e. high and low pressure cut-out). e) Thermometers for temperature measurement at various points In the cycle. f) Energymeter for compressor input measurement. g) Condensate measuring arrangement. 2.Heating Circuit – Air heaters with input control provided with energymeter for input measurement. Maximum heating capacity 1 Kw. 3.Steam generator and injector for humidification of air. All above components are connected to a duct of size 200mm. X 200mm. in which airflow is generated by axial flow fan. 4.Anemometer for measurement of air velocity, (range 0-15 m/sec. Following experiments can be conducted on the unit a) Cooling of atmospheric air. b) Heating of atmospheric air. c) Humidification of atmospheric air. d) Dehumidification and heating of atmospheric air. (Cooling coil acts as dehumidifier at reduced airflow.)SERVICES REQUIRED:
1.440 V, 15 A, 3 Phase supply with earthing connection. 2.Floor space area about 3 m. X 2 m.
Artery model showing plaque building
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Demonstration Meter Inter Scale
Description
Housed in a ABS plastic case 300x150x300 mm with glass front and rear. Moving coil type with accuracy of + 2.5%. Basic sensitivity of meter is 5 mA, 100mV f.s.d. The meter can be used to demonstrate the working principle of AC or DC ammeters or voltmeters with the interchangeable plastic scales. DIFFERENT DIALS ARE AVAILABLE.
Automatic Gear Box Actual Cut Section
Automatic Gear Box – Actual Cut Section
The working of automatic gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of automatic gear box are shown in actual working form. This model helps the student to understand the working of the automatic gear box very easily. It is specially made dissectible for demonstration purposes.
Storage Vial
These polypropylene vials add to the existing range of Polylab storage vials.
Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring which makes it a leak proof vial.
These vials are also used for the storage of biological material, animal & human cells etc.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Vail 2.0 ml | 500 | |
| Storage Vail 5.0 ml | 500 | |
| SV - 10 ml | 500 | |
| SV - 5 ml | 500 |
Lagged Pipe Apparatus
Lagged Pipe Apparatus:
The apparatus consists of three concentric pipes mounted on suitable stand. The space between innermost and the middle pipe is fifed with a lagging material and the space between the middle and the outer most is filled with and other lagging material. The lagged pipe is heated with a cartridge heater inserted at the axle length of the pipe. Voltmeter and ammeter on the panel can measure the input to the heater. The intermediate temperatures can be measured by the thermocouples attached at the surfaces of the pipe. Thus the resultant conductivity of the materials can be found out.
SPECIFICATIONS:
1.Pipes : a)Gl pipe (innermost) – 6 cm. (Outer Diameter). b) Gl Pipe (Middle) – 8.5 cm. (Mean Diameter) c)G! Pipe (Outermost) – 10.7 cm. (inner Diameter) d)Length of pipes 1 Meter. 2.Heater : Nichrome wire cartridge heater placed centrally, of suitable capacity. 3.Control Panel : a)Single Phase Dimmerstat – 1 No. b)Voltmeter (0 – 250V) – 1 No. c)Ammeter (0- 2A) – 1 No. 4.Temperature Indicator : Multichannel Digital Temperature Indicator ranging (0 – 300 C) using Cr/AI ThermocouplesServices Required:
1. A.C. Single Phase 230 V electric supply 2. Floor Area-1.5 Meter X 1 Meter X 0.5 Meter High
