XTEMOS ELEMENT
AJAX PRODUCTS TABS
Emitting Diode (LED’s)
Bridge rectifier is designed with four LEDs internally arranged in bridge pattern fitted inside a plastic moulded case. Two LED’s are red and two LED’s are green. This device is used to demonstrate the functioning of a bridge rectifier, i.e., to convert alternating current (AC) into direct current (DC). Two yellow sockets are used for AC input. Two sockets, one red and one black, are used for DC output. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
8085 Microprocessor Trainer Kit
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed. • RAM : 8KB expandable upto 32KB, Jumper selectable. • EPROM : 8KB expandable upto 32KB, Jumper selectable. • Lithium Battery backup for RAM. • 21 Keys multi-function keyboard with double shot characters for long life. • 6 digit 7Segment RED LED Display. • 3 Channel 16 bit counter / timer terminated in a 10 Pin Connector. • 48 TTL I/O Lines, terminated at 26 pin FRC connector • RS232C Compatible serial Port terminated in a 9 Pin "D" Male Connector. • One VXT Bus (50 Pin FRC Connector) for interfacing VBMB series of Experiment boards and bus expansion. • Built-in SMPS Power Supply: Input : 230V AC, Output: +5V / 3.5A, +12V / 150mA. • Built in Line Assembler and Disassembler provided. • Software single stepping of user programs by instruction for software debugging. • This trainer helps to learn the characteristics of double acting cylinder namely direction, speed & force. • A Microcontroller ADC relay driver provided to actuate the cylinder. • Gear pump supplies the hydraulic fluid to double acting cylinder through direction control valve. • Pressure control valve controls the flow rate of fluid to cylinder. • Single phase induction motor drives the pump. • Control unit communicate with PC and controls the double acting cylinder using LabVIEWSoftwares. • Two proximity sensors are provided to indicate the position of the cylinder. • Load cell measures the force developed by the cylinder. • 5/2 Double Solenoid Valve directs the cylinder. • One tank is used to store the hydraulic fluid.
Open Wind Tunnel Apparatus
Technical Description
A wind tunnel is the classic experiment system for aerodynamic flow experiments. The model being studied remains at rest while the flow medium is set in motion, and thus the desired flow around the model is generated. Open wind tunnel used to demonstrate and measure the aerodynamic properties of various models. For this purpose, air is drawn in from the environment and accelerated. The air flows around a model, such as an aerofoil, in a measuring section. The air is then decelerated in a diffuser and pumped back into the open by a fan. The carefully designed nozzle contour and a flow straightener ensure a uniform velocity distribution with little turbulence in the closed measuring section. The flow cross section of the measuring section is square. The built-in axial fan with guide vane and a variable-speed drive is characterised by an energy-efficient operation at high efficiency. Air velocities of up to 28m/s can be reached in this open wind tunnel. The trainer is equipped with an electronic two-component force sensor.Lift and drag are detected and displayed digitally. The air velocity in the measuring section is displayed on the inclined tube manometer. The tube manometers is recommended for measuring the pressure curves in drag bodies. Extensive accessories allow a variety of experiments, for example lift measurements, pressure distributions, boundary layer analysis or visualisation of streamlines. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.Learning Objectives & Experiments
– Determine drag and lift coefficients for different models – Pressure distribution when flowing around drag bodies – Boundary layer analysis – Investigation of flutter – Wake measurementFeatures
* Open wind tunnel for a variety of aerodynamic experiments * Homogeneous flow through the flow straightener and special nozzle contour * Transparent measuring sectionXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Electric Motor, Demonstration
Newton’s Colour Disc, Motor Driven
Serological Water Bath
Specifications
Material of Construction Inner chamber and lid Stainless Steel ,Outer chamber Mild Steel duly powder coated. Insulation Special grade mineral wool Heating- Immersion heaters Control panel - On/off switch - Heating and mains indicators - Thermostatic temperature controller Power- 220 V / 50 HzAccessories
Stainless steel top lid- Tray Optional Stirrer with 1/20 hp Motor with S.S. rod and blade - Digital Temperature Indicating Controller - Microprocessor based PID Digital temp. Indicator-Cum-Controller| Capacity | Load | Temperature |
|---|---|---|
| 14 Liters | 1.0 KW | Range:5°C above ambient to 100°C |
| 18 Liters | 1.5 KW | Sensitivity: ±0.5°C or better |
| 25 Liters | 2.0 KW | Sensor PT:-100 |
| 32 Liters | 3.0 KW | Accuracy: +/-5°C |
pH, Conductivity and Temperature Meter, Digital, Table Model
Highly stable and accurate.
Cell Constant Adjustment Facility
3.5 Digit Red LED Display
Technical Specification
General Power: 220 V AC ± 10%, 50Hz Dimensions: 75 x 175 x 275 mm (App.) Weight: 2.5 Kg. (App.) Temp. Compensation: 0 to 50°C adjustable from temperature. Parameters pH Range: 0 - 14 pH Resolution: 0.01 pH Accuracy: ± 0.01 pH ± 1 Digit Temp. Compensation Manual: 0 to 100°C Temperature Range: 0 - 100°C Resolution: 0.1°C Accuracy: ± 0.2% ± 1 Digit Sensor RTD: (PT - 100) Conductivity Range: 0 to 20 mS/cm in two Ranges Accuracy: ± 0.5% ± 1 Digit Resolution: 1µS/cmAccessories
pH combination electrode Cond. Cell Temperature probe Operation manual Dust cover pH stand 7 & 4 pH bottles BeakerXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Conical Friction Clutch Working Model
Burner Bunsen Natural Gas
Ice Melting Kit
Description
Demonstrates the difference in thermal conductivity of two different materials. The kit consists of two identical blocks, one made of aluminum and other made of plastic. When an ice cube is placed on aluminum it turns into water in seconds, while on plastic block it melts slowly. The aluminum block has a larger heat capacity and a higher thermal conductivity while the plastic block has lower values of both parameters. With instructions.
LABORATORY AND MEDICAL MONOCULAR MICROSCOPE
PRODUCT DESCRIPTION:
Being a leading firm in this industry, we are deeply engaged in offering a high-quality range of MS 30 Medical Monocular Microscope.
Details:
- MS-30 Student Monocular Compound Microscope
- Viewing Body Monocular tube, Straight,
- Stand Monocular, frame inclines back to 90°
- Eyepiece eyepiece 10x
- Nosepiece Quadruple revolving Nosepiece
- ObjectivesSA series Achromatic objectives 10x/ NA 0.25 , 40x/ NA 0.65 (SL) , 100x/ NA 1.25 (SL, Oil)
- Stage Stage plate size 124 x 120mm with Mechanical stage for X and Y movement of slide up to 30 x 75mm with graduated scale and Vernier’s
- Focusing Separate coarse and fine focus controls. Coarse movement by Rack & Pinion and fine movement by Screw Lever Mechanism
- Condenser Sub-stage Iris diaphragm with moving up and down through rack and pinion, condenser NA 1.25 with Blue Filter
- Illumination System Plano concave reflector mirror mounted at the base
- Package Contents Thermocole Box, with operation manual, dust cover and cleaning cloth
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Brush, Semi Micro
SPECIMEN JAR WITH BAKELITE COVER, ‘S.G.’
Electronic Balance
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Hand & Table Microtome
The Hand & Table Microtome is used to cut thin sections of Microscopic materials, such as specimen parts of plants and animals.
It is Considered as the basic form of a microtome permitting microtomic cuts by hand in a quick and accurate way.
The microtome is suitable for practical courses in microscopy, for field work during excursions, for school education and for a serious amateur of biology.
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
Fluid Mechines Hydraulic Machines Models
FLUID MECHANICS & HYDRAULIC MACHINES MODELS
1. Hook Gauges
2. Venturimeters & Orificemeters
3. Manometers
(A) Pitot Tube
(B) U Tube Double Column Manometer
(C) Differential Manometer
(D) Inclined Manometer
4. Valves Models
(A) Hydraulic Non Return Valve
(B) Gate Valve
(C) Globe Valve
5. Turbines & Pumps Models
(A) Different Impellers Of Pumps And Turbines (Set Of 8) :
(i) Mixed Flow Runner Cast Aluminium
(ii) Axial Flow Runner Cast Aluminium
(iii) Radial or Centrifugal Runner Cast Aluminium
(iv) Kaplan Runner Cast Aluminium
(v) Francis Runner Cast Aluminium
(vi) Domestic Self Pumping Runner of Brass
(vii) Centrifugal Runner Actual Cast Iron
(viii) Pelton Wheel Runner Cast Aluminium
(B) Display Board For Pipes
(C) Hydraulic Elevator:
(D) Hydraulic Ram Non Working Model
(E) Pelton Turbine Model
(F) De-Lavel Turbine Model
(G) Kaplan Turbine Model
(H) Francis Turbine Model
(I) Impulses Turbine Working Model
(J) Air or Steam Pressure Turbine Model
(K) Pure Reaction Turbine Model
(L) Radial Turbine Model
(M) Gear Pump Model:
(N) Rotary Pump
(O) Centrifugal Pump : Actual Cut Section
(P) Reciprocating Pump : Actual Cut Section
(Q) Model Of Air Lift Pump Model
(R)Pendulum Pump Model
(S) Archemedian Screw Pump Model
(T) Tubewell Model :
(U) Deep well Turbine Pump Model
(V) Submersible Pump Model
(W) Hydro-Electric Power Installation Model
6 Axis Robotic Trainer
For beginners this kit is very useful to learn the concept and working. For experienced, this kit helps to make new ideas. This kit is used to study the ROBO characteristics of arm movement. Each axis has one stepper motor. Gripper has one miniature cylinder to pick and place the object. Software controls the ROBO arm and measures the motor axis and arm axis. Simplicity of this kit makes maintenance easier and friendly to user. This kit is very flexible to operate and easy to move.
Features
• Easy to learn • New design • Easy for maintenance • Drive by stepper motor • Easy to programSpecification
• Arm : Jointed Arm • Axis : 6 • Motor : Stepper Motor • Gripper : Pneumatic • Drive : Stepper Motor Drive • Controller : MicrocontrollerBase
• Angle of movement : 320º • Gear Type : Spur Gear • Position Detector : Limit SwitchIntermediate ARM
• Angle of movement : 90º • Gear Type : Spur Gear, Worm Gear • Position Detector : Limit SwitchVertical ARM
• Angle of movement : 90º • Gear Type : Spur Gear • Position Detector : Limit SwitchXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Hot Air Oven
| Specification | : | Hot air oven, 2 shelves |
|---|---|---|
| Technical Specifications | : | |
| Inside Body | : | Stainless Steel |
| Out Side Body | : | MS Powder coated with stove enamel paint. (SS body also available) |
| Number of Selves | : | 2 Adjustable Perforated Selves. |
| Body Structure | : | Double Walled structure filled with glass wool insulation |
| Number of Heaters | : | 2 x 1000 Watts |
| Heater Quality | : | High Quality Chrome Heater insulated with ceramic beads |
| Air Circulation | : | By Air Circulating Fan to ensure even temperature distribution. |
| Ventilation | : | Ventilation port with adjustable Opening. |
| Temperature Control | : | By Digital Temperature indicator and Controller |
| Temperature Display | : | Digital Temp. display |
| Range of Temperature | : | Ambient to 250ºC |
| Accuracy | : | 0.10C |
| Least Count | : | 1.0C |
| Power | : | 220 Volt AC 50 Hz. Single Phase |
| Sizes available are | : | 12" x 12" x 12" (28 Ltr.)14" x 14" x 14" (45 Ltr.)18" x 18" x 18" (95 Ltr.)24" x 24" x 24" (224 Ltr.) |
Special Human Physiology Charts
Description
Poly art Charts are multi colored, accurate in details, printed on plastic, laminated on both sides, washable, non-tearable and long lasting, with plastic rollers, size 75 x 100 cm.The Lymphatic System
Excretory System – Kidney, L.S. Excretory System – Ureters Excretory System – Urinary bladder Excretory System – Malpighian Corpuscle T.S. Skin Reproductive System Brain External Features L. S. Eye – Eye Muscle L. S. Eye – Tear glands L. S. Eye – Physiological diseases of eye Ear and its parts Skeletal System Endocrine glands Digestive System Circulatory System – Types of blood cells Circulatory System – L. S. in heart & T. S. in blood vessel Circulatory System – Vein valves Circulatory System – Systematic & pulmonary circulation Respiratory System – Larynx Respiratory System – Trachea Respiratory System – Alveolus L. S. in Central Nervous System (CNS) Region in which the nerves impulses transport to central nervous system through the synapse Human Reflection Arch
Digital Coating Thickness Meter
Description
Digital Coating Thickness Meter We offer high quality of Digital Coating Thickness Gauge. Statistics (Number of readings, average, Std. deviation, max. ,; min.) are updated with every reading and displayed simultaneously. It helps to decide how many readings are to be taken. Continue taking readings till you start getting reasonably consistent statistics.
Disintegration Test Unit
Features
Digital timer with 1 second resolution. Accurate time out provided by microprocessor based time totalizer. Baskets move Up & Down as per IP/USP test specifications. Temperature Controlled by sensitive thermostats. Digital Tablet Disintegration Apparatus is designed for accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test to batches of six tablets, simultaneously. The unit consists of two beakers having capacity of 1000 cc each. In these beakers, suitable disintegration media can be taken. These can be temperature controlled using a in-built heater and a highly thermostat fitted inside the instrument. Microprocessor based time to talizer is provided for accurate time readout.Specifications
System :Digital Tablet Disintegration Apparatus. Up and Down Speed:30 rpm ± 2 rpm. Accuracy: 2% Resolution:1 sec. Operating Temp. Range:0 - 100°C Power:230V ± 10%, 50Hz.AC
Lubrication System Of An Automobile
In this model the working of lubrication system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a lubrication system of a car are shown in actual working form. This model helps the student to understand the working of the lubrication system of a car very easily. It is specially made dissectible for demonstration purposes.
