XTEMOS ELEMENT
AJAX PRODUCTS TABS
Direction of Current
Dishes, Crystallizing
Dicot & Monocot Root
Prismatic Compass
Description
• Made of Aluminium/brass. • Size 100mm, 125 mm, 150 mm dia. • Complete in Case with Aluminium Telescopic/Rigid/Wooden Tripod. • Aluminium circle consist of a needle graduated to 30min (0.5) graduations. • Painted with water proof paints. • Carrying cases are made of Fibre with carrying straps. Least count 30'.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Accessories Set For Demountable Transformer
Description
Comprising 1 welding coil of 5 turns on former with insulated handle and short-circuiting pins,1 annular melting trough with insulated handle to show heating by induction,1 jumping ring which is thrown clear when primary current is started and a floating ring which remains freely suspended when primary current is flowing.
Pneumatic Trough
We offer Pneumatic Trough to our esteemed clients.
The Pneumatic Troughs offered by us are made of polypropylene, autoclavable and are available in different sizes.
Moreover, the Pneumatic Troughs can be used for a wide range of applications including storage, sterilizing & drying lab ware etc.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Pneumatic Trough Ø-180 mm x h-60 mm | 6 | |
| Pneumatic Trough Ø-200 mm x h-100 mm | 6 | |
| Pneumatic Trough Ø-250 mm x h-100 mm | 4 |
Diffraction Object Holder
Digital Stroboscope
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Shunt Active Filter Trainer
Specification
• FPGA Spartan 3A DSP board used for generating the PWM signals. • Three phase 3 level diode clamped inverter used as a Active filter. • SRF (or) Instantaneous PQ theory will be used to generating reference current. • PI control or fuzzy logic will be used to regulate the dc link capacitor voltage. • Reference DC link Voltage will be 250V. • Hall effect current transducers used to sense the source currents, load currents and compensation currents. • Hall effect voltage transducers used to sense the dc link voltage and source voltages. • Necessary source inductor and filter inductor provided. • Input source Line voltage -200V (Peak). • Input source Current -10A (Peak). • Power Rating -3KW. • Reactive power compensation can be provided. • 3KW linear and non-linear loads will be given. • User can modify source, filter inductance and external loads. • User can modify control algorithm. • Industrial type cabinet provided. • Before compensation source current THD will be greater than 26% • After compensation source current THD - 2.5 - 4% in 3 level inverter - 4 - 5% in 2 level inverter
Airway Intubation Model
Description
The Difficult Airway Management Simulator offers a realistic airway management training with 24 various difficulty levels including 3 different mouth openings, 2 neck flexibility options, 2 positions for the vocal codes and an inflatable tongue.Training Skills:
Airway opening techniques (head tilt, jaw thrust) Bag-Valve-Mask ventilation Pre intubation airway assessment "Sniffing position" Pressurization of external larynx to improve the laryngeal view Intraoral/intranasal intubation Use of oropharyngeal airway (OPA) Use of nasopharyngeal airway (NPA) Use of laryngeal mask airway Use of video laryngeal scope Use of tracheal intubation scope Confirmation of successful ventilation by thoracic and abdominal movement Feedbacks on incorrect procedures including esophagus intubation and unilateral intubation Securing the tube in place with tapes or Thomas endotracheal tube holderTraining Model Includes:
1 manikin 3 upper incisions 1 lubricant 1 50ml syringe Size: 27.6 x 15.4 x 9.9 inRecommended Equipment:
Macintosh laryngoscope: blade size 3, 4 Tracheal tube: internal diameter 7.0-7.5mm Laryngeal mask Air-Q: size 3.5 LMA supreme: size 4 I-gel: size 4
Wave Machine, Metal
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Main Voltage Coils, For Demountable Transformer
Petri Dish
These Petri Dish offered by us is clear, unbreakable, & autoclavable.
The PS Petri Dish with fitting proves excellent for culture exp.
Made in polystyrene, this transparent Petri Dish provides an excellent inside view.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Petri Dish 50 mm | 36 | |
| Petri Dish 75 mm | 36 | |
| Petri Dish 100 mm | 36 | |
| Petri Dish 125 mm | 12 | |
| Petri Dish 150 mm | 12 | |
| Petri Dish (Culture) | 12 |
Human Torso With Head
Description
Full size, 10 parts, without sterno – abdominal wall but with ribs, sternum and clavicle with their attachments. Thoracic and abdominal organs, individually detachable lungs, stomach, liver, intestine, heart, which is further sectioned in two parts. Half of skull cap is removed, and brain can be taken out, exposing the interior of the skull. Sectioned head and neck depicts internal organs of the region, sexless, on base, with key card.
Human Placenta
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Floating Magnet Set
Dissolution Rate Test Apparatus
Specification
Consist of thermostatic control water bath which maintains temp. at 37DegC with + 0.5 Deg C variations. Provided with borosilicate vessel 1000 ml, variable speed motor, cylindrical wire mesh basket & shaft with blades of stainess steel. Single Basket, (Analog) Single Basket, (Digital R.P.M) Single Basket, (Digital) Temp. & R.P.M
IoT Gateways
Human Biology Microslide Set
This set has been assembled to provide a range of microslides suitable for use in Biology and Human Biology course.
Set of 24 slides consisting of
| Artery and vein | Bone, TS |
| Colon, TS | Eye, VS |
| Human blood smear | Joint, LS |
| Kidney, LS | Kidney, VS triple stain |
| Lung, TS thin section | Myelinated nerve fibers |
| Nerve Cells from spinal cord | Oesophagus, TS |
| Ovary | Phagocytosis in lung |
| Plantar skin, VS sweat glands | Scalp, hair insertion, sebaceous glands |
| Small intestine | Smooth muscle |
| Spinal Cord TS | Stomach, TS |
| Striated muscle, teased | Testis |
| Tongue, VS | Trachea, TS |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Primary and Secondary Coil
Description
The apparatus demonstrates the principle of Electromagnetic Induction and helps explain the concept of a transformer. Primary and Secondary coil consist of coils mounted on plastic spools, with 2 binding posts on each coil. You can slide the primary coil inside the secondary coil. Also includes a soft iron core for induction experiments. Primary coil has 480 turns while secondary coil has 3800 turns. Requires a galvanometer and bar magnets, not supplied with apparatus.
Fuel Supply System Petrol MPFI Type
Fuel Supply System Petrol MPFI Type (Actual Working Model) Multi Point Fuel Injection
This is an actual working model of fuel supply system of a MPFI petrol engine. The parts details is as under :
1. Fuel Tank
2. Fuel Filter
3. Motorised Fuel Pump
4. Pressure Gauge
5. Fuel Rail
6. Fuel Injectors
7. ECU
8. Igniter & Ignition Coil
9. Distributor
10. Spark Plugs
11. Power Supply
12. Fuel Gauge & Control Panel
This model helps the student to understand about the parts & working of MPFI system. It is specially designed for demonstration purposes. The model will be supplied with key card & very interesting literature regarding working.
8085 Microprocessor LC LCD Trainer
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed. • RAM : 8KB expandable upto 32KB, Jumper selectable. • EPROM : 8KB expandable upto 32KB, Jumper selectable. • Lithium Battery Back up for RAM • PC Keyboard (104Keys) • 16x2 Alphanumeric Dot Matrix Liquid crystal display with back light • 3 Channel 16 Bit counter / timer terminated in a 10 pin connector using 8253 • 24/22 TTL I/O lines, terminated at 1 No of 26-Pin FRC connector by using 1 No of 8255/1No 8155 respectively • 8 Nos of Digital inputs terminated and given through on board 8 way Dip switch • 8 Nos of Digital outputs are terminated and displayed in the 8 Nos of SMD type LEDs • Digital I/O lines are terminated in 20-Pin connector • RS 232C compatible Serial port terminated in a 9-pin 'D' male connector • One VXT-Bus (50-Pin FRC Connector) for interfacing VBMB series of experiment boards for bus expansion. • Interrupts are terminated in a 5-Pin connector • Built in Line Assembler and Disassembler provided. • Software single stepping of user programs by instruction for software debugging.
Amphibia
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall, Size 75×100 cm. Frog External character Frog Internal Anatomy Frog Skeleton Frog Skull, different views Frog Development part I-showing stages from egg to Gastrulation Frog Development part II-showing Gastrula to newly hatched Tadpole
Ultrasonic Transmitter And Receiver Set
This apparatus consists of a self-contained transmitter and receiver operating in the 40 kHz region. The transmitted wave is modulated at a user controlled variable frequency of about 2 kHz and this is detected by the receiver which amplifies the signal and drives a miniature integral loudspeaker. Both transmitter and receiver are contained in separate plastic enclosures measuring 175 x 100 x 40 mm which contain all the electronics and the 9 V batteries. The receiver has front panel 4mm sockets so that the output can be monitored on an oscilloscope for more quantitative measurements. The system is ideal for demonstrating sound waves above the hearing threshold and reflection properties associated with sonar etc. A special feature is the second transducer on the transmitter which can be switched on when required to produce two coherent sources. By moving the receiver along a line parallel to the two sources interference patterns can be dramatically demonstrated simplifying the Young’s slits experiment or enabling it to be demonstrated using waves other than light. Complete with batteries, full instructions and suggestions for use.
