XTEMOS ELEMENT
AJAX PRODUCTS TABS
Latent Heat of Steam Apparatus
Spring Unit of Mechanical Model
Description
For showing potential energy in a wound-up spring and its conversion to electrical energy by driving a dynamo and lighting a lamp. May also be used to wind up a weight on a cord showing the change from potential energy to kinetic and back to potential in the raised weight. The steel shaft carries a clock spring with a free wheel device and winding ratchet, also an aluminium 'V' pulley 56 mm. diameter. One end of the shaft overhangs the base for use as line shaft when winding up a weight. Dimensions 220 x 100 x 100 mm. high Supplied complete with driving belt.
Soil Auger, Helical
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Placentation
Health
CNC Lathe Trainer With Servo Drives
CONTROLLER:
(1) Type of control system: PLC based system (2) Main Spindle Drive : AC Motor with VFD (3) Z and X Drives : Stepper drive with RAMP function (4) Input to Stepper Motor : Optically Isolated (5) Motor Drive :TTL Compatible (6) Run Speed Control : Computer controlled through software (7) Interpolation : Liner / Circular / Parabolic (8) Cycles Used :G,M,S,T,F,I,K,M,F (9) Cycles : Circular Interpolation / Canned (10) Threading : Straight / Taper (11) Power Devices : Short Circuits and over Temperature Protected (12) Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
(1) Center height : 100mm (2) Swing over Carriage : 80mm (3) Distance between Centre : 250mm (4) Longitudinal Travel : 250mm (5) Weight : 350 kg (6) Dimension in mm : 1100 x 750 x 1700 (7) Rapid Travel : 500mm/min (8) Resolution X & Z Axis : 10micron (9) Dt. Motor Power : 40V – 4A (10) Lubrication : ManualSPINDLE:
(1) Spindle Speed : Continuous Variable (2) Spindle Power : 2 HP (3) Inside Taper : MT3 (4) Speed Range : 50 to 3000RPM
Storage Vial (Internal Thread)
We provide high quality range of Storage Vial.
An addition to the range of storage vials, is this vial which has internal thread in it.
The cap fitted with O-ring screws in to the vial and makes it a leak proof storage vial.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Vail - Internal Thread 2.0 ml | 500 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Level Process Controller
Features
• It is a miniature version and occupies less space. • A RF capacitance Level Transmitter is used to sense the tank level. • An Industrial standard electro pneumatic converter is used to control the control valve. • A Pneumatic control valve is used to control the Level of the tank. • A Process tank of 3 liter capacity with graduated level scale. • A Rust proof reservoir tank (SS) capacity of 8 liters. • A centrifugal pump is provided for water circulation. • An air Regulator cum filter of capacity (0-2.1) Bar is provided to regulate the Air pressure. • Bypass line provision is provided to avoid pump over loading. • Hand valve provision is provided to make the disturbance study. • All the water flow lines are fitted by SS pipes. • USB/Serial port data acquisition is provided.
Magenta Box
Magenta Box is very often used in tissue culture & agricultural research experiments.
Main body of this Magenta Box is made of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene.
This autoclavable Magenta Box is square in shape giving itself a space saving features.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Magenta Box | 12 |
Photon Energy Array
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Car Chassis Rear Wheel Drive Actual Cut Section
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM:It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
Resonance Apparatus, Simple Form
Cross Staff
Description
The Cross-Staff was used at sea from the beginning of the 16th century until the first half of the 18th century. It was used to measure the sun's altitude, especially at the meridian passage. With the knowledge of the sun's declination, the mariner could then obtain his latitude. The staff is original, with the inscription. The cross pieces are replicas. Different cross pieces were used depending on the altitude. A different scale is on each side of the staff.
SPECIMEN JAR WITH BAKELITE COVER, ‘S.G.’
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Microscope Slide Set Basic
Set of 25, Microscope slides created
Biology syllabus with following subjects.
Supplied in Box.
Kidney TS
Allium root tip LS, mitosis
Kidney VS, injected
Allium root tip, squash
Squamous epithelium
Moss leaf, for cells (check cells)
Leaf epidermis
Human blood smear
Stem, TS, separate bundles
Artery and vein
Mucor, asexual
Monocot (Zea) root, TS
Lung through bronchiole VS
Hair insertion
Ovary VS
Testis TS
Spinal cord, TS
Pancreas
Leaf, TS
Stem, LS old
Dicot stem apex, LS
Lung injected
Lily anther, Tetrad
Optical Disc
Description
A 500 mm diameter disc marked every 5° is mounted on a heavy stand and is rotatable around its centre. It can be held in any desired position. The lamp house, with a 12V 24 W special filament lamp has rotatable slots to provide light beams of varying widths and also narrow single, double and triple beams. Attached to the lamp house is an adjustable lens carrier with lens to provide diverging, parallel or converging light beams which are clearly visible in classroom. The lamp house can be held in any desired position around the disc. Optical elements are two 50 x 25 mm plane glass mirrors, and a metallic cylindrical mirror, each mounted in a holder, for reflection. For refraction, 20 mm thick acrylic semi-circular block, bi-convex lens, bi-concave lens each 140 mm long and a trapezium with 125 mm base are provided. Each of these elements has embedded magnets to hold on to the disc.
Capsule Filling Machine
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Mock Layout Of Car Wiring Conventional Type
It is an open type instructional apparatus. This unit is capable of operation when a standard battery is connected to the given terminals, Consisting of all essential parts as self starter, alternator, ampere-meter, ignition coil, distributor, 4 spark plugs, horn, long lights with dipper light, park-lights, dipper, back stop light and switches. The whole system is beautifully fitted on 100 x 80 cm base with electric motor working on 220 volts A.C and capable to drive the alternator. Without battery.
Bending Moment & Shear Force Apparatus
INTRODUCTION:
Shear Forces occurs when two parallel forces act out of alignment with each other. For example, in a large boiler made from sections of sheet metal plate riveted together, there is an equal and opposite force exerted on the rivets, owing to the expansion and contraction of the plates. Bending Moments are rotational forces within the beam that cause bending. At any point within a beam, the Bending Moment is the sum of: each external force multiplied by the distance that is perpendicular to the direction of the force.EXPERIMENT MANUAL:
1. To verify the Shear force a cross-section of the beam. 2. To verify the bending moment in cross–section of beam with a flexure condition.APPARTUS SPECIFICATION:
1. Dimensions : 158 cm X 45cm X (h)60cm 2. Total Beam Length : 160 cm with flexure 3. Width of Beam : 5 cm 4. Distance of Length in between : 5 cm 5. Height of beam : 36 mm 6. No. of Hanger for weights : 3 7. No. of Spring Balance : 2 (of 10kg) 8. Total Weight of Apparatus : 13.1 kgACCESSORY REQUIRES:
1. Shear force apparatus 2. Bending Moment Apparatus 3. Hangers 4. Weights 5. Two Spring balances – 10kgs
Conical Flask
Our superior quality Conical Flasks are made up of polypropylene, these cone shaped flasks are rigid, translucent & autoclavable.
The screw cap keeps the contents of the Conical Flasks contamination free and makes the flask leak proof.
The threads of the Conical Flasks should be disengaged before autoclaving.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Conical Flask 100 ml | 12 | |
| Conical Flask 250 ml | 12 | |
| Conical Flask 500 ml | 12 |
Baby Weighing Balance
A single beam scale, robust steel body with epoxy powder coated parts.
The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each.
One hanger and one slotted mass is provided to increase the capacity of the balance.
When only the hanger is suspended from the end of the beam the capacity increases to 10 kg and the reading starts from 5 kg onwards on the scale up to 10 kg.
On adding the slotted mass on to the hanger the capacity increases to 15 kg and the reading starts from 10 kg onwards on the scale up to 15 kg.
The tray is detachable and can be easily replaced in position by sliding on to fixed plate.
Second scale is provided which reads 0 to 1 kg in division of 10 gms.
Making the total capacity of balance 16 kg in to 10 gms.
Shell Tube Heat Exchanger Water To Water
Heat exchanger is the devices used to transfer the heat from one fluid to other. The shell and tube heat exchanger is two tube single pass heat exchanger. The hot fluid is hot water obtained from water heater. The coil fluid is cold water. The schematic flow arrangement is shown in figure. Hot water enters the lower side of end box, flows through the tubes in lower half of shell and comes to the other end of the shell. It reverses its direction, flows through tubes in upper half of the shell and leaves out. Cold water enters lower part of the shell passes over the tubes between the baffles and leaves out the shell through outlet at upper surface of shell.
