XTEMOS ELEMENT
AJAX PRODUCTS TABS
Candle Holder
Generation Of Involute Gear Tooth Profile
This board illustrates the process of cutting of involutes Gear Teeth, by use of rack type cutter It consists of 3 white acrylic discs A, B, C. having pitch circle diameter 450 mm, 300 mm & 200 mm respectively. A gear tooth profile with module 25mm can be traced out on a peace of paper placed between disc and cutter. An affect of Interference and Undercutting on correct profile of gear tooth can be studied from the profiles traced.
Ringing Table
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Model of Galilean Telescope
Multi Process Trainer
Features
• Pressure transmitter mounted at the bottom of the process tank • Flow transmitter (DPT) with rotameter mounted across the pipe line to sense the flow of water • Temperature sensor of (RTD) type mounted at the outlet of the heater • An industrial type heater as a heat source • FHP pump for water Circulation • SS Storage tank of 15 liters Capacity • Power driver provided to vary the pump speed and Heater Power. • Orifice plate is used for pressure drop measurement. • An electronic signal conditioner is provided. • Bourdon tube pressure gauge is provided to measure the tank. • Latest power driver is used to drive the pump & heater. • USB/Serial port data acquisition is provided.
Pentax Tribrach Adaptor
Description
Traverse Tribrach Adapter with Optical Plummet • 2.5X optical plummet • 60-second plate vial, adjustable • Precision-machined axis rotates 360º • Compatible with all prisms with a 24.9 mm bayonet base • Adjustable height : 100 mm-to-120 mm • Fits all standard three-prong tribrachs • The over point accuracy is 0.5 mm at 1.5 m
Wire helix (Slinky)
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Storage Vial (O Ring)
Pin Fin Appatatus
The apparatus consists of a channel in which the pin fin is tested in both natural as well as forced convection. The channel is connected to the suction of blower. The blower is operated to touch the pin fin in forced convection only. In natural convection, the window above the pin fin is kept open to the atmosphere. Five thermocouple tapings are given along the length of the fin. Thus the temperature distribution along the length can be distinguished. Also natural and forced heat transfer co-efficient, effectiveness, etc. can be found out.
Specifications:
1.Three pin fins- a) M. S. b) Brass c) Al 2.Channel- 150mm x 100mm x 1000mm 3.Blower – run by f.h.p. motor. 4.Orifice meter along with water manometer to measure airflow. 5.Voltmeter and ammeter to measure power input. 6.Cr- Al thermocouple with 6 tapings along with temperature indicator. 7.Dimmerstat to control power input. 8.A band heater to heat the pin fin. A technical manual accompanies the unit.Services required:
1.220v, stabilized single phase supply along with earthing Connection. 2.Floor area 2m x 1m x 1m height.
Material Kit Solids
Economy Kit of 14 materials blocks.
This economy kit consist fourteen materials in the form of rectangular blocks, intended to familiarize the student with the appearance, 'feel', texture, hardness and density of a range of common substances.
Blocks, 50 x 40 x 30 mm. Wood, paraffin wax, aluminium, Iron, foamed polystyrene.
Blocks, 20 x 20 x 100 mm. Perspex, glass, slate, aluminium, softwood, Marble.
Blocks other sizes: Lead 50 x 50 x 20 mm
Brass 20 x 20 x 50 mm
Iron 40 x 40 x 20 mm
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Hope’s Apparatus
Alage & Fungi
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Chlamydomonas , General structure & Life History Ulothrix general structure and L.H. Oedogonium Life Cycle Spirogyra structure & conjugation Chara structure & L.H. Nostoc structure & L.H. Ectocarpus structure & L.H. Dictyota structure & L.H. Fucus structure & L.H. Rhizopus structure & L.H. Mucor structure & L.H. Yeast Bacteria – I showing structure and forms Bacteria – II showing reproductive Virus types, structure & L.H. Penicillium Albugo(Cystopus) structure & reproduction Puccinia graminis structure & L.H. Agricus structure & life history
Calorimeter Stirrer, Copper
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Distillation Plant (Manasty Type), Wall Hanging
The unit is recommended for making pyrogen fee distilled water of a very high degree of purity, Made out of S.S. special kettle element is fitted with Ejection Device / Auto cut for safety of the element is provided water supply is stopped.
The cork fitted to the unit is of brass C.P.A. wall Mounting clamp is provided with the unit.
Supplied with cord and plug to work on 220/240 volts A.C. Stainless Steel, Output approx. 3/4 Ltr./Hr.
Stainless Steel, Output approx. 5/6 Ltr./Hr.
Aluminium Dicasted, Output approx. 3/4 Ltr./Hr.
Aluminium Dicasted, Output approx. 5/6 Ltr./Hr.
Expansion Apparatus
Description
Two cast metal uprights, height 18 cm, fitted with two nickel plated rods supporting expansion bar of length 38 cm. Expansion bar is fixed to one upright and moves a pointer on the other, when heated With scale reading 0 to 90°, supplied with one each, aluminium, brass and iron expansion bars. Comprising two castÂmetal uprights linked by a pair of parallel plated metal support rods and supporting an expansion bar at the top. Supplied with expansion bars. Comprising two cast-iron uprights, height 18 cm linked by two nickel plated rods supporting on expansion bar, length 38 cm fixed to one upright and resting on a friction pointer placed at the other. Supplied with scale reading 0 to 90 deg and one each of aluminium, brass and iron expansion bars.
Powder Funnel
We are the major Exporter and Trader of premium quality Powder Funnel.
These polypropylene Powder Funnel are best suited for transferring powdered reagents.
The unique features of these funnels include its parallel stem that minimizes bridging of powder.
These funnels are steam autoclavable at 121 C.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Powder Funnel 65 mm | 36 | |
| Powder Funnel 80 mm | 36 | |
| Powder Funnel 100 mm | 36 | |
| Powder Funnel 150 mm | 12 |
Ticker Tape Timer 12V
Ticker Tape Timer 12V
These devices use an electromagnet which activates a striker, producing dots via a carbon disk on the ticker tape.
With 4mm terminal sockets.
The dots are produced at a rate of 50 - 60Hz depending on the mains frequency.
There are 6V and 12v units available.
The Ticker Tape Timers are used in the measurement of velocity, acceleration and general timing.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Bottle Filling Module
Specification
• One proximity sensor to detect the bottle presence • Opto coupler sensor to detect the bottle position. • A mechanical base fixed with stepper motor and gear mechanism provided to hold 5 bottles and rotate in circular motion. • A tank is provided to store the liquid. • One solenoid valve to control the volume of liquid flow into the bottle. • One Reservoir tank with FHP pump to feed the water to supply tank. • Two magnetic switches provided to maintain the level of water in supply tank.  
Mobile Insect Storage System
Description
An all new 'VERSATILE' space efficient, elegant looking, sturdy and compact system for insect storage supported with care, safety-privacy vis-a-vis being compact to accommodate large quantity in less space, easy to handle, convenient to monitor-sort. The system contains Compactor units which can be arranged to suite your requirements, according to the space available and above all can be secured with a single lock. The metallic compactor units made of mild steel with powder coated paint finish can be moved for handling the specimens and again joined to be locked only on the end unit and all units are secured. Showcases are arranged in rows of 20 each with two rows in each unit. End units are for 40 showcases whereas the intermediate units accommodate showcases back to back, i.e., 80 showcases and again the end unit for 40 showcases. Intermediate units can be increased as per space requirement. There are options for showcases, metallic or wooden. Size options of 53x45x7.5cm. or 45x45x7.5cm. or 45x30x6.5cm. with pinning EVA sheet is base, provision for insecticide, puller knobs, index card holder etc.
Xilinx Spartan 3E FPGA Trainer Kit
Specification
• XC3S250E - 4PQ208C / XC3S500E-4PQ208C • 16 Nos. of digital input using slide switches with LED indication • 16Nos. Of digital outputs using discrete LEDs • 16 x 2 LCD is provided for display the text message. • One Reset Switch • One switch is provided for giving manual clock • FPGA configuration through - JTAG Port - On board Flash Prom XCF02S • Total 158 I/O pins : 124 pins used for integrating peripherals like LED, Switches etc., balance pins available to user in 20 pin • header (3.3V compatible) • 1No of 26pin header to interface VLIM cards like Traffic Light Controller (5V compatible) • On board programmable PLL oscillator from 1 MHz to 100 MHz using jumpers • 4 Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor Driver provided. • 4 * 4 matrix key provided • Housed in a sleek plastic cabinet with built in SMPS 5V/2A. • Compatible with Xilinx ISE Design Suite WebPACK Software. • On board USB to JTAG is available for configure FPGA (Supports only with Vi JTAG 5.0 Software)
Constant Mesh Gear Box Actual Cut Section
Constant Mesh Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Battery Cell Tester
It is apparatus for testing voltage of cells and batteries. It is a centre zero, fight weight voltmeter of low consumption having robust and compact construction, suitable for in-door and outdoor use. It is housed in steel tough bakelite case which can conveniently be held in one hand while testing. The movement is of the moving coil type and is sufficiently damped and comes to rest quickly. Range 3: 0-3 volts or any range as required.
