XTEMOS ELEMENT
AJAX PRODUCTS TABS
Bottle Stand for 6 bottles
Dissolution Rate Test Apparatus
Specification
Consist of thermostatic control water bath which maintains temp. at 37DegC with + 0.5 Deg C variations. Provided with borosilicate vessel 1000 ml, variable speed motor, cylindrical wire mesh basket & shaft with blades of stainess steel. Single Basket, (Analog) Single Basket, (Digital R.P.M) Single Basket, (Digital) Temp. & R.P.M
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Kaplan Turbine Test Setup
DESCRIPTION:
Kaplan Turbine is an axial flow reaction Turbine named in honor of Dr. B. Kaplan, a Gennan Engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to QH. As the head (H) decreases the J discharge (Q) must increase to produce the same power. The present Set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of Centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draught tube and the casing for observation of flow on to the airfoil vanes. This runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of this brake arrangement so that the efficiency of the turbine can be calculated. The Set-up is supplied with control panel. A draught tube is fitted on the Outlet of the turbine. The Set-up is complete with guide mechanism. Pressure and Vacuum Gauge are fitted at the Inlet & Outlet of the turbine to measure the total supply head on the turbine.EXPERIMENT:
1.To study the operation of a Kaplan Turbine 2.To determine the Output Power of Kaplan Turbine 3.To determine the Turbine EfficiencyUTILITIES REQUIRED:
● Water Supply and Drain.● Electricity 15 kW, 440V AC, Three Phase
TECHNICAL SPECIFICATIONS:
| MODEL | HM 109 (1.33 HP) | HM 109 (5 HP) | |
| Output Power | 1.33 HP / 1 Kw | 5 HP / 3.75 Kw | |
| Discharge | 1500 LPM (Approx.) | 5000 LPM (Approx.) | |
| Supply Head | 5 m | 5 m | |
| Rope Brake Dynamometer | Dia 200 mm | Dia 300 mm | |
| Sump Tank | Capacity 300 Ltrs. | Capacity 600 Ltrs. | |
| Water Circulation Centrifugal Pump | Capacity 7 HP, Three Phase | Capacity 20 HP, Three Phase | |
| Speed | 1500 RPM (approx.) | ||
| Runner | With adjustable Curved Vanes | ||
| Discharge Measurement | Pitot Tube with Manometer | ||
| Control Panel | Star/Delta Starter, Mains Indicator, MCB for overload protection | ||
| The whole set-up is well designed and arranged in a good quality painted structure. | |||
Sterility Test Apparatus (S.S Manifold)
It consists of Stainless steel holders in the manifold of 3 of 6 to hold 47 mm dia membrane filters, the tops of the holders are connected to the outlets of flushing tube with silicone tubing and glass top cock.
A vacuum resistant flask or wolf bottle must be placed between the manifold and vacuum pump.
(Supplied without wolf bottle and vacuum/pressure pump).
These units are used for sterility testing when the membranes filter is to be removed from the holder for incubation in culture media.
Filtration area is 12.5 cm and has a holding capacity of 250ml.
Though the only vacuum is required for filtration, some pressure is required for flushing liquids.
SPECIFICATIONS
| Material: | Stainless Steel | |
| Branch Test: | 3 Dia. 47mm | |
| Filtration Area: | 12.5 cm | |
| Holding Capacity: | 250 ml |
FEATURES
Robust design. Easy to use. Rustproof.APPLICATION
For microbiology, biochemistry, hydrobiology (DNA/RNA). Beverage analysis & food testing. Protein binding, gravimetric analysis, coliform, yeast, mould total bacteria & sterility testing. Ideal for water & wastewater analysis. Residue precipitate analysis and contamination tests. General Liquid Filtration.Single Test (Filter Holder S.S) Three Test
Vacuum Pump with Plate
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Brush, Test Tube
5KVA IGBT Based Converter Inverter System
DC Motor Specification
• Power : 3HP • Armature voltage : 220V DC • Field voltage : 220V DC • Speed : 1500 RPM • Make : Benn • Double side shaft extensionSlip Ring Motor
• Type : 3phase slip ring induction motor. • Power : 2KW • Stator voltage : Three phase 415V AC, 4A • Rotor voltage : Three phase 210V AC, 6A • Speed : 1410 RPM • Make : BenndsPIC 30F4011 based PWM Controller
• Microchips’ dsPIC30F4011 16 bit digital signal controller operating at 20MIPS • On chip 48K Bytes flash program memory • On chip 1K Bytes data EEPROM • On chip 2K Bytes RAM • Four Compare/PWM output • Six PWM output for Motor control • One 3 channel Quadrature Encoder interface circuit/4 capture input • 9 Channels 10 bit ADC of 500Ksps conversion tune. • One RS232 Compatible serial port Opto isolated & terminated at 9 pin D male connector • 6 PWM outputs and two capture inputs and two compare outputs are terminated at 34pin FRC connector. • 4 Channels of DAC output & 5 channels of ADC inputs are terminated at 26 pin FRC connector • 16 x 2 alphanumeric LCD display
Zener Diode Unit
Band Brake Working Model
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Single Phase Bridge Firing Circuit
Specification
• Line synchronized IC based linear firing circuit for SCR applications. • Line synchronization achieved by 230 / 9V step down transformer. • Four nos. firing pulses to trigger four SCRs. • 1:1:1 Pulse transformer used for gate pulse isolation. • One no. potentiometer used to vary the firing angle (180° - 0°). • All four pulses terminated on the front panel for external SCR device module interface. • Carrier logic circuit implemented for SCR self start, carrier frequency 4KHz. • Debounce logic circuit implemented for SCR gate pulse ON/OFF. • One no. toggle switch for gate pulse ON/OFF. • 230V, 5Hz AC input, fuse provided for over load protection. • One no. ON/OFF switch with LED indication for power ON/OFF. • Provision to control the firing angle through external 0 to 5V DC.
Digital Kymograph
Digital Kymograph has gained immense recognition in exporting and supplying quality assured array of Digital Kymograph Consists of a revolving drum that is wrapped with a sheet of paper and this kymograph is used to measure atmospheric pressure, the functioning of steam engines and tuning fork vibrations. Offered kymograph is made in complete compliance with predefined industry norms at our well-equipped unit. Furthermore, this Digital Kymograph is extensively appreciated and demanded in the market due to its rugged design and excellent performance.
Features
Excellent performance. Power efficient. Easy operation. Result accuracy.Specification
Digital Speed Selection. Spirit Level: For adjusting level. Auto Stop after One Complete Cycle. 16 x 2 LCD Digital Display with Back Light simultaneous display of all functions on the display and selection through display. Highly Accurate Speed : E/C System Speeds available -0.12.,0.25,0,.50,0.75,1.00,1.25,mm/Sec With Accurance of +/-0.01%. Timer With Alarm Time Multiplier (o-10 min in multiple of 30 sec.) for indicating washing Cycle Drug Injection times etc. Very Low Power Consumption (12 volts 1 Amp.). Operated with Stepper Motor which is highly accurate and run by Microprocessor based program. Battery Back Up (Optional): Auto Conversion to Battery Mode in Case of Electricity Failure. Back up 1 to 4 hours. Special Chrome Plated and Powder Coated Body: Extremely Resistant to Corrosion and Leak Proof Design. Self Lubrication Gear. And More Feature Available.
CNC Mill Trainer1
CONTROLLER:
Type of Controller System : PLC based system under collaboration from tudor,uk Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive TTL Compatible Input to Stepper :Optically lsolated , motor drive TTL Compatible Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std Codes Real time tool path :with online 3D simulationTABLE:
Length x Width : 600 x 225 (approx.) Clamping Area : 450 x 160 (approx.) T Slots : 10mm slot width.MACHINE DETAILS:
Resolution : 5 micron(Standard) Distance from sindle :25-225mm(Nose to table top) Centerline to column :170mm Rapid Travel 700 mm/min Weight in kg : 950kg Dimension in mm : 1200 x 1200 x 1900 mmSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPM
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Human Head And Neck L. S.
Prismatic Compass
Description
• Made of Aluminium/brass. • Size 100mm, 125 mm, 150 mm dia. • Complete in Case with Aluminium Telescopic/Rigid/Wooden Tripod. • Aluminium circle consist of a needle graduated to 30min (0.5) graduations. • Painted with water proof paints. • Carrying cases are made of Fibre with carrying straps. Least count 30'.
Mock Layout Of Car Wiring Latest Type
Mock Layout Of Car Wiring Latest Type
All the components used in the apparatus are of modern car. The complete mock layout is beautifully divided into 5 sections as under
(A) Front Lighting Panel
(B) Dash Board Panel
(C) Ignition System
(D) Rear Lighting Panel
(E) Motorised Charging System
With the help of this mock layout system its becomes very easy for the students to understand the actual working of electrical system of a modern car.
Laboratory Spatula
Acquire from us high quality Laboratory Spatula at affordable price range.
Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge.
This is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Spatula 150 mm | 12 | |
| Spatula 200 mm | 12 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Bar Breaking Apparatus
Description
To show the forces which can be exerted during thermal expansion or contraction. Comprising a heavy cast iron frame 340x120x100mm with slotted end pillars to carry a stout iron bar. The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars. Supplied complete with ten breaking bars.
Corcyra Egg Laying Cage
Description
Frame made of MDF sheet planks. Fine wire mesh provided on top and bottom fitted with 3mm dia hole wire mesh on one top, a rounded opening 3cm dia is provided which can be closed with wooden plug. On one side a rounded opening 11cm with an arrangement for drop clouser with the help of MDF sheet cover is provided for manually putting in/taking out the material. Size 35x25x18cm
SILICA BASIN (Round Bottom) with spout
PRODUCT DESCRIPTION
Round Bottom Basin With Spout is high purity material that enables products to resist corrosion and withstand the sharp change in temperature. Both of them meet requirements acquired by chemical and physical analysis and have 200ml Capacity.
Available in Different Dimensions:
20ml, Dia. 55mm x Ht. 23mm
45ml, Dia. 75mm x Ht. 27mm
70ml, Dia. 87mm x Ht. 33mm
85ml, Dia. 94mm x Ht. 36mm
100ml, Dia. 100mm x Ht. 45mm
200ml, Dia. 113mm x Ht. 47mm
