To observe heat transfer under different conditions by measuring the temperatures of the insulated containers before and after connecting them with the metal bar.
Consists of two insulated containers, two thermometers and a metal bar and instruction manual.
Nickel plated copper calorimeter of 50 x 75 mm lagged and enclosed in an outer vessel of 75 x 100 mm size, with cover having terminals, a heating coil suitable for 3 – 6 V supply and holes for thermometer and stirrer.
With stirrer but without thermometer.
Copper calorimeter 75 x 50 mm with felt insulation, outer vessel of 100 x 65 mm size with a plastic lid having holes for thermometer and stirrer.
A thermometer holder is fixed to the outer vessel. Complete with stirrer.
Copper calorimeter of 75 x 50 mm resting on felt pad inside wooden polished box provided with a brass nickel plated thermometer holder and copper stirrer.
A 500 mm long metal rod is supported in a plated brass tube with three tubules for steam inlet, outlet and thermometer.
The tube is mounted on a stand with an adjusting screw at one end and a micrometer screw reading to 0.01 mm on the other, with terminals for connecting a bell or galvanometer to indicate contact.
With copper, brass and iron test rods but without thermometer.
Demonstrates the difference in thermal conductivity of two different materials.
The kit consists of two identical blocks, one made of aluminum and other made of plastic.
When an ice cube is placed on aluminum it turns into water in seconds, while on plastic block it melts slowly.
The aluminum block has a larger heat capacity and a higher thermal conductivity while the plastic block has lower values of both parameters.
With instructions.
Double-Wall Calorimeter with 1.5 ohm heating coil and 4 mm standard terminals for electrical connections. Complete with insulated stirrer and single-hole rubber stopper.
Operates on 6-V DC. Instructions included.
Reviews
There are no reviews yet.