A metal stand fitted with 0-100 cm x 1 mm vertical wooden scale and supporting a mercury reservoir sliding on a metal rod.
An air thermometer bulb fitted to a bracket can be attached to the other rod at either of two positions.
With U-shaped base.
Complete with 1 meter rubber tubing to connect reservoir to the bulb.
Supplied without mercury.
A heavy cast iron stand slotted to carry a stout iron bar, with ten cast iron breaking bars.
Comprising a heavy cast iron frame 340 x 120 x 100 mm with slotted end pillars to carry a stout iron bar.
The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars.
Supplied complete with ten breaking bars.
A 500 mm long metal rod is supported in a plated brass tube with three tubules for steam inlet, outlet and thermometer.
The tube is mounted on a stand with an adjusting screw at one end and a micrometer screw reading to 0.01 mm on the other, with terminals for connecting a bell or galvanometer to indicate contact.
With copper, brass and iron test rods but without thermometer.
Metal, for experiments on specific heat of different metals, cylindrical metal blocks 1 Kg ± 2%. Each block has a central hole for a special immersion heater and an offset hole for Thermometer.
Jolly's thermometer bulb connected via a 3-way stopcock to mercury tube.
Sliding indicator on right hand limb with reservoir sliding on vertical clamping rod.
Metal vessel to surround the bulb.
Mounted on wooden stand, height 740 mm.
All glass parts except reservoir are made of borosilicate glass.
To determine the co-efficient of absolute expansion of mercury.
Glass tubes with vertical limbs contained within glass jackets approx.
460 x 25 mm height x diameter are closed by bungs and fitted with inlet and outlet tubes.
Upper ends of these vertical limbs are angled on emergence from the jackets to produce two short, adjacent limbs placed against a silvered glass scale 0 to 12 cm x 1 mm.
Mounted on stand 610 x 230 mm, height x width.
Overall height 750 mm approx.
supplied without mercury.
Fitted on a wooden base cast metal uprights and rod mountings.
A 20-0-20 scale is provided to notice the expansion in rods.
The counter weighted needle is used for easy reading.
A knurling screw is provided for zero adjustment.
Supplied with three metal rods one of each Aluminium, Brass and Steel.
Reviews
There are no reviews yet.