Jolly's thermometer bulb connected via a 3-way stopcock to mercury tube.
Sliding indicator on right hand limb with reservoir sliding on vertical clamping rod.
Metal vessel to surround the bulb.
Mounted on wooden stand, height 740 mm.
All glass parts except reservoir are made of borosilicate glass.
Apparatus is fitted on heavy channel base, at one end of which is an adjusting screw, at the opposite end is a micrometer screw reading to 0.01 mm for measuring the expansion.
Supplied with one each of aluminium, brass and iron expansion rods but WITHOUT thermometer.
Consisting of metal rod 500 mm in length and 4.5 mm dia.
enclosed in a well - lagged, metal tube with three tubules for steam inlet, outlet and thermometer.
The metal rod to be investigated is supported in the steam jacket by detachable rubber bungs situated at each end of the tube.
To determine the co-efficient of absolute expansion of mercury.
Glass tubes with vertical limbs contained within glass jackets approx.
460 x 25 mm height x diameter are closed by bungs and fitted with inlet and outlet tubes.
Upper ends of these vertical limbs are angled on emergence from the jackets to produce two short, adjacent limbs placed against a silvered glass scale 0 to 12 cm x 1 mm.
Mounted on stand 610 x 230 mm, height x width.
Overall height 750 mm approx.
supplied without mercury.
To observe heat transfer under different conditions by measuring the temperatures of the insulated containers before and after connecting them with the metal bar.
Consists of two insulated containers, two thermometers and a metal bar and instruction manual.
Polished aluminum container placed in an outer wooden case with thermometer, plastic top fitted with two terminals for heating coil and a hole for thermometer.
To illustrate expansion of metal on heating and contraction on cooling, with steel bar of length 100 x 10 mm and plated brass gauge with a cutout to just accommodate the bar and two holes through which the bar passes when cold.
Fitted on a wooden base cast metal uprights and rod mountings.
A 20-0-20 scale is provided to notice the expansion in rods.
The counter weighted needle is used for easy reading.
A knurling screw is provided for zero adjustment.
Supplied with three metal rods one of each Aluminium, Brass and Steel.
To determine co-efficient of expansion of a gas at constant pressure.
A glass U-tube with a bulb and stopcock at one end, the other limb being open.
An outlet tube from the bottom of the U tube passes through a rubber bung and has a stopcock at the end.
The stem below the bulb is graduated 3 x 0.1 ml. An inlet tube with a mohr clip also passes through the bung.
A glass water jacket encloses the U tube.
All glass parts made of borosilicate glass requires only 20 ml mercury, which is not included.
Reviews
There are no reviews yet.