Specially designed for metal block calorimeters.
Heating element enclosed in a metal tube with two connecting leads which are insulated with heat resistant insulation. 12 V, 50 W.
Demonstrates the difference in thermal conductivity of two different materials.
The kit consists of two identical blocks, one made of aluminum and other made of plastic.
When an ice cube is placed on aluminum it turns into water in seconds, while on plastic block it melts slowly.
The aluminum block has a larger heat capacity and a higher thermal conductivity while the plastic block has lower values of both parameters.
With instructions.
Two cast metal uprights, height 18 cm, fitted with two nickel plated rods supporting expansion bar of length 38 cm.
Expansion bar is fixed to one upright and moves a pointer on the other, when heated With scale reading 0 to 90°, supplied with one each, aluminium, brass and iron expansion bars.
Comprising two castmetal uprights linked by a pair of parallel plated metal support rods and supporting an expansion bar at the top. Supplied with expansion bars.
Comprising two cast-iron uprights, height 18 cm linked by two nickel plated rods supporting on expansion bar, length 38 cm fixed to one upright and resting on a friction pointer placed at the other.
Supplied with scale reading 0 to 90 deg and one each of aluminium, brass and iron expansion bars.
A metal stand fitted with 0-100 cm x 1 mm vertical wooden scale and supporting a mercury reservoir sliding on a metal rod.
An air thermometer bulb fitted to a bracket can be attached to the other rod at either of two positions.
With U-shaped base.
Complete with 1 meter rubber tubing to connect reservoir to the bulb.
Supplied without mercury.
Consists of a thick brass calorimeter 90 x 65 mm, a bung with steam inlet and outlet tubes, a felt cover and a one liter brass sheet boiler with bung to take the steam tube.
A heavy cast iron stand slotted to carry a stout iron bar, with ten cast iron breaking bars.
Comprising a heavy cast iron frame 340 x 120 x 100 mm with slotted end pillars to carry a stout iron bar.
The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars.
Supplied complete with ten breaking bars.
Demonstration Apparatus for Illustration of Thermoexpansion.
A 12 V Halogen bulb is fitted below the bi-metallic strip.
When heated the strip bends upward and breaks the circuit.
Metal, for experiments on specific heat of different metals, cylindrical metal blocks 1 Kg ± 2%. Each block has a central hole for a special immersion heater and an offset hole for Thermometer.
Reviews
There are no reviews yet.