XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

CPR Training Manikins(torso)

Description

This product is developed and produced by professionals in the purpose of providing an improved and convenient CPR training manikin for medical college, hospital and department of health’s training program.

Angel Property of Cyclic Quadrilateral

To teach sum of 4 angle of quadrilateral is 360°. This manipulative provided with cutout of angles from Quadrilateral. Provided with magnet at back to demonstrate on magnetic board. Diameter 21cm

Ringing Table

Ringing table for neat sealing of edges around coverslips on permanent microslides mounts, Solid enamelled aluminium body bevelled to give hand rest with a ball-race mounted turntable. A brush rest is fitted and concentric guide circles are engraved on the turntable which is fitted with slide clips

Artery model showing plaque building

We have developed and sustained long lasting relationships with our clients while maintaining competitive price structure. Incorporating technological advancements and techniques, we have acquired a notable position of leading Patient Education Models Manufacturer, Supplier and Distributor
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Signal Generator, Digital

This signal generator is a useful test instrument capable of generating multiple waveform and offers excellent waves shape, signal linearity, waveform symmetry and frequency range with selection of sine, triangular and square wave and amplitude variable 10 V peak to peak. 1 Hz to 100 kHz in five decade ranges selected by rotary switch named as frequency multiplier. Sine, triangular and square waveforms selected by push switch with LED indication. Output signal is 0 – 3.5 Vrms (10 V peak to peak) open circuit continuously control with uncalibrated amplitude control knob. Mains rocker switch with indicator Light. Signal Generator is versatile for general laboratory use; output signal is adjustable with the combination of frequency multiplier and set frequency dial with a low level of distortion. Set frequency is displayed on a 4 seven segment display. Output Voltage is continuously variable with selector range 1 V and 10 V.There is two pair of output safety sockets. One for CRO output (experiment for amplification, filter etc.) and another pair of sockets to speaker to drive a speaker and to demonstrate the audio signal frequency range 20 Hz to 20 KHz.

Conical Friction Clutch Working Model

Conical Friction Clutch – Working Model Properly constructed model. Complete on base with operating lever.

Chik

Ovary TS Showing Oogenesis Testis TS Showing Spermatogenesis Primitive Streak TS 24 Hrs. Embryo TS Somite Region 36 Hrs. Embryo TS Typical 48 Hrs. Embryo TS Eye Region 48 Hrs. Embryo TS Heart Region 60 Hrs. Embryo TS Typical Region 72 Hrs. Embryo TS Heart Region 72 Hrs. Embryo TS Eye Region 48 Hrs. Embryo Sag. Sec. 60 Hrs. Embryo Sag. Sec. 72 Hrs. Embryo Sag. Sec. 96 Hrs. Embryo Sag. Sec.

Pocket Compass

Description

Diameter 50 mm with cover and locking arrangement. Dial marked with points of compass and degrees.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Smart Energy Meter

A Smart Energy Meter based on Analog Devices IC has been developed to build an Advanced Metering Infrastructure (AMI). The AMI system facilitates networking capability via GSM, ZigBee and ModBus. A Smart Energy Meter Development system has been developed by us, which consists of 1φ/3φ measurement section, a 32-bit ARM controller, wireless modules and powerful software. The student can completely understand the concept and usage of this trainer. This can be also used as one of the IOT server node.

Features

• 3 Phase energy readings displayed in the Graphics LCD • Simple design, Efficient and Highly Accurate • Easy connectivity for various loads • Keys to change the settings • Supports GSM, ZigBee and ModBus for networking • LPC2148 based processing board • 32/16 bit ARM7TDMI-S CPU with 60MHz maximum CPU clock • On board peripherals for extension • Graphics LCD interfaced to display the energy readings • Keys for various settings • Current Sensors and Voltage Sensors provided to measure 3 phase voltages and currents • Polyphase energy metering IC provides highly accurate energy measurement • Energy metering IC interfaced via I2C with Controller module • CC2530 Controller with maximum 32MHz CPU clock • High-speed and low-power 8051 CPU • 2.5GHz IEEE 802.15.4 compliant RF transceiver upto 250kbps data rate • UART Connectivity to interface with CPU

Voltmeter Tripple

Description

Triple Scale, Moving coil D.C. only with 4 mm. terminals. 3V/15V/30V 3V/15V/300V

Larynx, 3 Parts

Description

Larynx model but dissectible into 3 parts
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Wave Machine, Powell’s

Description :- Consisting of 19 spheres, each mounted on a 75 mm long rod with a collar for attachment to a shaft. The spheres are mounted at 20° intervals, equally spaced along the shaft. The shaft rotates in two pillars mounted on a base.

Oscilloscope

This Oscilloscope is corresponding to horizontal with small size. The bandwidth of Y axis is DC 10 MHz and the deflection factor is 5 mV – 5 V / div. It can be up to 50 V / div. using with the 10:1 probe. Sweep deflection factor is 0.1 ?s / div. (1) Single Channel Single Trace Oscilloscope (2) Bandwidth : 10 MHz (3) Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997). (4) Wide measurement (5) High sensitivity and trigger lock (6) Sweep switch adopts digital code switch and accuracy (7) Proper to use in colleges and for engineers and technicians (8) Deflection factor is 5 mV – 5 V / div in 1-2-5 Sequence in 10 steps (9) Accuracy: ±5 % ( 10) Maximum Input Voltage: 400Vpk (11) Sweep deflection factor is 0.1 us / div to 0.1 s / div (12) Accuracy: ±5 % (13) Trigger Sensitivity: INT:1.5 div EXT:0.3 V (14) Trigger mode: INT, EXT, LINE, TV (15) Trigger Sweep Mode: NORM, AUTO, TV. LOCK. (16) Calibration Signal: 0.5 V Square wave of 1 kHz. (17) CRT Effective working Area: 8 x 10 div. 1 div = 6 mm. (18) Auxiliary Power Supply: 220V AC 50Hz

Accessories Set For Demountable Transformer

Description

Comprising 1 welding coil of 5 turns on former with insulated handle and short-circuiting pins,1 annular melting trough with insulated handle to show heating by induction,1 jumping ring which is thrown clear when primary current is started and a floating ring which remains freely suspended when primary current is flowing.

Three Phase Cyclo Converter

This module is designed for three phase half wave-step down cycloconverter. It consists of 18 Synchronized firing pulses, 18 SCRs, Relevant power supply and circuitry for frequency divisions.

Specification

• Eightin nos. SCR with RC snubber protection is provided for 3phase • cycloconverter power circuit (each phase consist of 6 SCRs) Rated at 1200V@25Amps. • Three nos. center tapped inductor (0%.50%, 100%) is provided for power circuit. • Eightin nos. Isolated gate pulses for SCR power circuit. • One potentiometer is provided to vary the frequency. • One potentiometer is provided to vary the output voltage. • MCB protection. • Housed in sleek screen printer cabinet. • Provision for V/F control Power Supply. • Input 440V ± 10%, 50HZ three phase AC supply. • ± 15V DC, 9V, 9V, 9V AC (3phase) for the firing circuits. • 24-0-24V 3phase input for power circuit.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Cold Chisels

Description

For geological specimen extraction. Set of six in plastic wallet comprising one each flat cold chisel 100 x 6 mm 130 x 9.5 mm 150 x 13 mm 180 x 16 mm 180 x 19 mm and one crosscut cold chisel 150 x 13 mm.

Pole Holder

Description

We are supply of high quality Pole Holders for prisms. These have been manufactured using the finest quality of aluminium and brass, in order to ensure their strength and durability. We provide the poles in the shape of a tripod for increased sturdiness while holding prisms and other survey instruments. We also offer customization and can supply these products in accordance with the demands of our clients.

The specifications of the Pole holder :

• Manufactured using fine quality aluminium and brass • High on parameters like strength and durability • Improved sturdiness while holding survey instruments

Recalculating Ball Type Steering System

Recalculating Ball Type Steering System – Actual Working The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.

TMS320C6713 Based DSP Trainer

KEY FEATURES:

• Highest performance floating point Digital signal processor (DSP) • 150 MHz Clock rates • 6.7ns Instruction cycle time • 16 bit external memory interface (EMIF) • 16 bit Host-port interface (HPI) • Two multichannel Audio serial ports (MCASPs) • Two multichannel Buffered serial ports (MCBSPs) • Inter integrated circuit (I2C) Module

ONCHIP MEMORY:

• 4KB L1P Program cache memory • 4KB L1D data cache memory • 256KB L2 unifies cache mapped RAM

ON BOARD FEATURES:

• 512Kx 8bit FLASH for monitor Program • 4M x 16 bit SDRAM for External Memory. • 8 way DIP switches & LEDs to user interface • LCD interface, I2C RTC • Stepper motor Interface • On board USB and UART for serial communication • PCM3002 Audio codec
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture