XTEMOS ELEMENT
AJAX PRODUCTS TABS
Tape Measures
Both sides metric or one side metric and other in feet-inches Fiber glass with PVC covering.
Non-conducting, waterproof, washable, and water-resistant.
Case made of zinc-coated steel sheet, covered with vinyl, & fitted with a flush winding handle.
all metal fittings are chrome-plated.
The Tape Measures are provided in size 5 meters, 10 meters, 15 meters, 20 meters, 25 meters, 30 meters.
Platyhelminthes
Planaria Body TS
Liver Fluke WM
Liver Fluke TS Middle Region
Liver Fluke TS Gonad Region
Liver Fluke TS Proboscis
Liver Fluke TS Post Region
Liver Fluke TS Post Sucker
Liver Fluke Cercaria WM
Liver Fluke Metacercaria WM
Liver Fluke Redia WM
Liver Fluke Sporocyst WM
Liver Fluke Miracidium WM
Tape Worm Scolex WM
Tape Worm Proglottid Immature TS, WM
Tape Worm Proglottid gravid TS, WM
Tape Worm Proglottid mature TS, WM
Tape Worm TS
BURETTE CLAMP
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Heart With Artery Blockage Models
Balance Spring
6 Axis Robotic Trainer
For beginners this kit is very useful to learn the concept and working. For experienced, this kit helps to make new ideas. This kit is used to study the ROBO characteristics of arm movement. Each axis has one stepper motor. Gripper has one miniature cylinder to pick and place the object. Software controls the ROBO arm and measures the motor axis and arm axis. Simplicity of this kit makes maintenance easier and friendly to user. This kit is very flexible to operate and easy to move.
Features
• Easy to learn • New design • Easy for maintenance • Drive by stepper motor • Easy to programSpecification
• Arm : Jointed Arm • Axis : 6 • Motor : Stepper Motor • Gripper : Pneumatic • Drive : Stepper Motor Drive • Controller : MicrocontrollerBase
• Angle of movement : 320º • Gear Type : Spur Gear • Position Detector : Limit SwitchIntermediate ARM
• Angle of movement : 90º • Gear Type : Spur Gear, Worm Gear • Position Detector : Limit SwitchVertical ARM
• Angle of movement : 90º • Gear Type : Spur Gear • Position Detector : Limit Switch
Ghat Tracer
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Artery model showing plaque building
Autoclave, Radial Locking
Specification
Double wall chamber Autoclave. The inner chamber and outer wall made of stainless steel, ring made of stainless steel/ mild steel. The lid is made of stainless steel tightened by radial arms through a steering wheel made of chrome plated mild steel. The instrument is absolutely leak proof. Equipped with pressure gauze, safety valve, double safety valve, steam release valve, rubber gasket, inner container, S.S bucket and mild steel legs for Autoclave. The Autoclave can hold the in between 5psi to 20 psi. Autoclave, Vertical, Double Walled, Radial Locking.| Capacity (Lt.) | Size | |
|---|---|---|
| 23 litres | (10” x 18”) | |
| 40 litres | (12” x 22”) | |
| 52 litres | (14” x 22”) | |
| 60 litres | (14” x 25”) | |
| 75 litres | (16” x 24”) | |
| 95 litres | (18” x 24”) | |
| 180 litres | (22” x 30”) |
Power Supply for Electrophoresis
Forceps (Different Types)
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Distributed Control System
A powerful, modular & upgradable DCS has been designed and configured based on Siemens controller SIMATIC PCS7 ASRTX (Micro Box). Distributed I/O system ET200M can be provided for field automation. The distributed I/O can be connected via Profibus, Communication. DCS consists of controller, Power supply unit, distributed I/O, Digital Input and Output modules, Analog Input and Output module. a Demo Panel and Simatic PCS7 V9.0 Software.
DCS Controller
• Make : SIEMENS. • Controller : SIMATIC PCS 7 AS RTX BOX. • Profibus Communication done via CP5611 onboard. • Transmission Rate of Profibus cable is 12 Mbit/s. • 2 x GBIT & RJ45 LAN • Core 17-3517 Processor 1.7GHz, 4GB DDR3 RAM, SSD 80GB, 4xUSB V3.0 • Mouse and Keyboard • Windows7 • Win AC RTX 2010 software controllerDistributed I/O station ET200M
• Support HART, PROFIBUS, Foundation Field bus. • 16 No’s of digital Inputs with 24V DC. • 16 No’s of digital Outputs with 24V DC. • 8 channels of Analog Inputs with 4-20mA. • 8 channels of Analog Outputs with 4-20mA. • 24VDC /10A inbuilt power supply.
Utility Tray
We excel in providing high quality Utility Tray to our valuable clients.
Our range of Utility Tray is well appreciated in the market for its high quality and durability.
this Polypropylene Tray can be utilized for wide range of purposes ranging from drying glassware to sterilizing and for storing any laboratory apparatus.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Utility Tray 375 x 350 x 130 mm | 6 |
CNC Lathe Trainer
Controller:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with Ramp function Input to Stepper : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled with software Interpolation : liner / Circular /Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation /canned Threading : Straight/Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 300mm Longitudinal Travel : 310mm Weight : 800kg Dimension in mm : 1300 x 800 x 1400 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron Automatic : providedAXIS TRAVEL:
X Axis : 80mm Z Axis : 310mmSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 2 HP Inside Taper : MT3 Speed Range : 50 to 3000Rpm
Human Tooth, Upper Triple Root In 6 Parts
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Reynold S Apparatus
DESCRIPTION:-
The Set-up is designed to verify Reynold’s Apparatus experimentally. The Apparatus consists of a glass tube which one end having bell mouth entrance connected to a water tank. At the other end of the glass tube a cock is provided to vary the rate of flow. Flow rate of water can be measured with the help of Measuring Cylinder and Stop Watch, supplied with the set-up. A capillary tube is introduced centrally in the bell mouth. To this tube dye is fed from a small container, placed at the top of Constant head Tank, through polythene tubing.EXPERIMENTS:-
Ø To study different types of flow. Ø To determine the Reynold’s Number and hence the type of floe either laminar or turbulent.UTILITIES REQUIRED: -
Ø Water Supply. Ø DrainTECHNICAL SPECIFICATION: - | ||
| Ø Tube | : | Material Borosilicate Glass |
| Ø Dye Vessel | : | Material SS, Suitable Capacity |
| Ø Capillary Tube | : | Material Copper/Stainless Steel |
| Ø Constant Head Water Tank | : | Capacity 40 Liters. |
| Ø Water Circulation | : | FHP Pump |
| Ø Flow Measurement | : | Using Measuring Cylinder |
| Ø Sump Tank | : | Capacity 60 Liters |
| Ø Stop Watch | : | Capacity 60 Liters. Electronic |
| Ø Control Panel Comprises of | : | Standard make, On/Off Switch, Mains Indicator, etc. |
| Ø The Whole set-up is well designed and arranged in a good quality painted structure. | ||
Bone Cutters
Magenta Box
Magenta Box is very often used in tissue culture & agricultural research experiments.
Main body of this Magenta Box is made of tough & transparent polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene.
This autoclavable Magenta Box is square in shape giving itself a space saving features.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Magenta Box | 12 |
Refractive Index of Water Apparatus
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Bar Breaking Apparatus
Description
A heavy cast iron stand slotted to carry a stout iron bar, with ten cast iron breaking bars. Comprising a heavy cast iron frame 340 x 120 x 100 mm with slotted end pillars to carry a stout iron bar. The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars. Supplied complete with ten breaking bars.
Test Tube PEG Rack
We bring forth supreme Test Tube PEG Rack for our clients.
Our range of Test Tube PEG Rack has been highly appreciated for its quality.
These can conveniently hold inverted tubes for drying purpose and minimizes collections of airborne contaminants inside the tube.
This rack can also be used to hold and dry electrophoresis and chromatography plates.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Test Tube Peg Rack-96 Places for 13mm Tubes | 6 | |
| Test Tube Peg Rack-50 Places for 16mm Tubes | 6 |
Plastic Storage Box
We export and trade high quality Plastic Storage Boxes.
These Storage Boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory.
Square shape of these boxes helps in saving shelf space.
Available in three different sizes these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Box 250 ml | 12 | |
| Storage Box 500 ml | 12 | |
| Storage Box 1000 ml | 12 |
St. Louis Motor Demonstration
Description
Students can explore how a simple electric motor works by doing a series of investigations. This St. Louis motor can be adjusted so students can study the effect of voltage and position of the brushes on the commutator. The motor consists of a two pole DC armature. The brush holder, with two heavy binding post terminals, can be rotated for experiments. The permanent bar magnets, supported by clamps, can be adjusted to the desired location. This apparatus requires 4 D cell batteries with holder (not included) or a power supply and two connecting leads (not included).
