XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Monocot Stem Anatomy T.S &L.S

Description

This model exhibits the various tissues and the scattered, closed and collateral vascular bundles in transverse and longitudinal sections in maize. The large pitted vessels, spiral and annular vessels show the cell wall thickenings in L.S. Useful model for teaching anatomy of monocot stem. Mounted on base with keycard.

Mirror, Plane

Description

Rectangular, glass, back silvered, with protective coating

75 x 25 mm 75 x 50 mm 75 x 75 mm 100 x 25 mm 100 x 50 mm 100 x 75 mm 150 x 25 mm 150 x 50 mm

Thermal Conductivity Of Insulating Powder

The apparatus consists of an insulating powder, which is enclosed in a cavity of two concentric spheres. The inner space of the inner sphere contains the mica heater. Input to the heater can be adjusted by the dimmerstat. The tappings on the surfaces of the inner sphere and outer sphere are used to find out the temperature difference between the spheres. This enables to find out the conductivity of powder.

Specifications:

1.Inner sphere dia. 100mm and outer sphere dia. 200mm. 2.Mica heater two heat the inner sphere surface. 3.Ten thermocouple tappings in the test section. 4.Plaster of Paris / asbestos powder in the test section. 5.Panel comprises of a)Voltmeter and ammeter b)Dimmerstat c)Temperature indicator

Services required:

1.220v stabilized single-phase supply. 2.Floor surface 1m x 0.5m at working height.
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Specific Gravity Blocks

Consisting one block each of brass, aluminium, steel and copper. Set of Four (A) Aluminium , (B) Copper , (C) Brass, (D) Steel. The sizes of the blocks are 50x13x13 mm.

Fuel Supply System Of A Petrol Engine

Fuel Supply System Of A Petrol Engine – Carburator Type Actual Cut Section Model This model consist of petrol tank, mechanical fuel pump, fuel filter & Carburator. Complete on 60 x 30 cm base with sectionised parts.

TDM-PAM Modulation and Demodulation

FEATURES:

• Crystal based clock generator • On-board synchronized sine wave generator (250Hz, 500 Hz,1KHz, 2KHz) • On-board DC voltage for receiver synchronization • Four channel Time Division Multiplexing &Demultiplexing • Three wire, Two wire and single wire transmission system • On-board PLL for clock Recovery • Comparator for receiver channel synchronization • Fourth order butter worth Low pass filter

TECHNICAL SPECIFICATION:

• Crystal Frequency : 6.4MHz • SinewaveType : On-board synchronized • SinewaveFrequency : 250KHz, 500Hz, 1KHz, 2KHz • DC Level : 0 to 5V (Variable) • Number of Channel : Four • Multiplexer Type : Switch Based • DemultiplexerType : Switch Based • Channel Synchronization : Comparator • Clock Recovery : Phase Locked Loop • Filter Type : Butter worth, Low Pass Filter • Filter Cut off Frequency : 3.4 KHz
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Animal Cage

Description

Made of iron S.S frame provided with thick iron mesh on sides. Hinged door on front. Provided with water bottle and feeding tray. Extra drawer provided in the base for collection of excreta. Well painted for elegant looking Feeding arrangement allows removal of bin from outside of cage with automatic drop closure. Size 30x23x30cm Size 45x45x38cm

U Shaped Magnet

Description

Economy chrome steel horseshoe magnet with keepers Shaped Magnet Alnico (Pair) Size are mentions below which we have :- 50 mm 75 mm 100 mm
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Set of Masses, Brass

Set comprises masses of brass with slots, brass hangers with hook. Fine finish, masses removable and replaceable on hanger. Set of 9 weights, one hanger each of 10 gm. Total weight 100 gm. Set of 9 weights, one hanger each of 25 gm. Total weight 250gm. Set of 4 weights, one hanger each of 50 gm. Total weight 250gm. Set of 9 weights, one hanger each of 100gm. Total weight 1000gm. Set of one hanger 20 gm. three weights 20 gm. Total weight 100gm. Set of one hanger 50 gm, nine weights 20 gm. One weight 10 gm. and two weights 5 gm. Total 250 gm. Spare slotted weights and Hangers 5gm., 10gm., 20gm., 50gm., and 100 gm. are also available.

Trinocular Microscope

Viewing Head:Trinocular Head Inclined at 45°, 360° Rotatable; 55-75mm interpupillary distance. Digital Camera or Digital Screen can be to the trinocular head.
Eyepiece:Paired Wide Field 10x, WF 15x.
Nosepiece:Quadruple Nosepiece.
Achromatic Objectives:4x, 10x, 40x (SL), 100x (SL, Oil Immersion).
Stage:Stage is fitted with co-axial mechanical stage.
Focusing:Coaxial coarse & fine focus knob.
Condenser:Two lens abbe condenser NA 1.25 with iris diaphragm, filter holder and blue filter, movable by rack and pinion mechanism.
Illumination:LED Illumination with adjustable intensity.

Bulk Density Apparatus

Specification

Material :Stainless Steel Bath Dimension (inch): 9X6X8

Product Description

Bulk Density Apparatus

Features

Dongles Bag Durability High tensile strength Rust proof body Accurate results

Mating Cage

Description

Similar to animal cage but with centre divider. Can be converted into a single cage by removing the centre divider. Separate door and feeding bottle and check.  Size : 45x30x30cm
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Resistance Substitution Board

Description

Set of 12 different value resistor from 33 Ω to 10 M Ω. A rotary switch is used to select the required resistance, 4 mm sockets are provided for connections.

Charle’s Law Kit

Description

A glass U-tube of 10 mm diameter the shorter limb of which has a stopcock near top and the longer limb can take a plastic tube. A scale is provided and can be attached to the shorter limb With red indicator oil but without 2000 ml tall form beaker which acts as a reservoir.

CNC Lathe Trainer Slant Bed

CONTROLLER:

Type of control system : PLC based system Axis motor and drive : Servo motor & drive with feedback Input ti servo : Optically lsolated Motor Drive : TTL compatible Interpolation : Linear/Circular /parabolic Cycles Used : G, M, S, T, F, I, K, M, F, Cycles : Circular interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuit and over Temperature Protected, Single Phase Protection Real Time Toolpath Simulation : provided

MACHINE DETAILS:

Center Height : 100mm Swing over Carriage : 80mm Distance between Centre : 825mm Weight : 700kg Dimension in mm : 1250 x 900 x 1500 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron (Dia.) Automatic Lubrication : provided Tool Changer : Automatic – 8 station

SPINDLE:

Spindle Speed : Continuous Variable Spindle power : 2HP Inside Taper : MT3 Speed Range : 100 to 3000 RPM

AXIS TRAVEL:

X Axos : 100mm Z Axis : 300mm

Thermopile

Description

Comprising four iron copper wires welded to make seven junctions, four on one side and three on other side. Brass terminals are provided for connections.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture